Skip to content

Composites University Technology Centre (UTC)

Organisational unit: Research Sub-grouping

841 - 850 out of 888Page size: 10
  1. 2007
  2. Published

    In situ measurements of through-the-thickness strains during processing of AS4/8552 composite

    Garstka, T., Ersoy, N., Potter, K. D. & Wisnom, M. R., 2007, In : Composites Part A: Applied Science and Manufacturing. 38, 12, p. 2517-2526 10 p.

    Research output: Contribution to journalArticle

  3. Published

    Quantification of acoustic emission from crack growth in plate structures

    Wilcox, P. D., Lee, C. K., Scholey, J. J., Wisnom, M. R., Friswell, M. I. & Drinkwater, B. W., 2007, Review of Progress in Quantitative Nondestructive Evaluation, Vols 26A and 26B. Thompson, DO. & Chimenti, DE. (eds.). MELVILLE: American Institute of Physics (AIP), p. 1493-1500 8 p. (AIP CONFERENCE PROCEEDINGS; vol. 894).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. 2006
  5. Published

    Global crack detection using bispectral analysis

    Hillis, A. J., Neild, S. A., Drinkwater, B. W. & Wilcox, P. D., 21 Dec 2006, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 462, 2069, p. 1515-1530 16 p.

    Research output: Contribution to journalArticle

  6. Published

    The interaction of oblique incidence ultrasound with rough, partially contacting interfaces

    Liaptsis, D., Drinkwater, B. W. & Thomas, R., 1 Dec 2006, In : Nondestructive Testing and Evaluation. 21, 3-4, p. 109-121 13 p.

    Research output: Contribution to journalArticle

  7. Published

    A critical investigation of the use of a mandrel peel method for the determination of adhesive fracture toughness of metal-polymer laminates

    Kawashita, L. F., Kinloch, A. J., Moore, D. R. & Williams, J. G., 1 Nov 2006, In : Engineering Fracture Mechanics. 73, 16, p. 2304-2323 20 p.

    Research output: Contribution to journalArticle

  8. Published

    A numerical analysis of the elastic-plastic peel test

    Hadavinia, H., Kawashita, L., Kinloch, A. J., Moore, D. R. & Williams, J. G., 1 Nov 2006, In : Engineering Fracture Mechanics. 73, 16, p. 2324-2335 12 p.

    Research output: Contribution to journalArticle

  9. Published

    Protocols for the measurement of adhesive fracture toughness by peel tests

    Kawashita, L. F., Moore, D. R. & Williams, J. G., 1 Oct 2006, In : Journal of Adhesion. 82, 10, p. 973-995 23 p.

    Research output: Contribution to journalArticle

  10. Published

    Effect of annealing temperature on permeability and giant magneto-impedance of Fe-based amorphous ribbon

    Phan, MH., Peng, HX., Wisnom, MR., Yu, SC., Kim, CG. & Nghi, NH., 24 May 2006, In : Sensors and Actuators A: Physical. 129, 1-2, p. 62-65 4 p.

    Research output: Contribution to journalArticle

  11. Published

    Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures

    Wisnom, MR., Gigliotti, M., Ersoy, N., Campbell, M. & Potter, KD., Apr 2006, In : Composites Part A: Applied Science and Manufacturing. 37, 4, p. 522-529 8 p.

    Research output: Contribution to journalArticle

  12. Published

    Acoustic measurement of lubricant-film thickness distribution in ball bearings

    Zhang, J., Drinkwater, B. W. & Dwyer-Joyce, R. S., 1 Feb 2006, In : Journal of the Acoustical Society of America. 119, 2, p. 863-871 9 p.

    Research output: Contribution to journalArticle