Research Output

Aligned Short Fibre Composites with High Performance

Yu, H., Potter, K. D. & Wisnom, M. R., 2013, 19th International Conference on Composite Materials (ICCM19).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

7 Citations (Scopus)

A mixed-variational, higher-order zig-zag theory for highly heterogeneous layered structures

Groh, R. & Weaver, P., 2015.

Research output: Contribution to conferenceConference Abstract

A modified cohesive zone model for fatigue delamination in adhesive joints: Numerical and experimental investigations

Al-Azzawi, A. S. M., Kawashita, L. F. & Featherston, C. A., 1 Oct 2019, In : Composite Structures. 225, 18 p., 111114.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
1 Citation (Scopus)
24 Downloads (Pure)

A morphing mechanical and electromagnetic antenna reflector concept based on curved corrugated structures

Painter, R., Remillat, C., Scarpa, F., Hilton, G. & Farrow, I., 1 Jan 2014, ICAST 2014 - 25th International Conference on Adaptive Structures and Technologies. International Conference on Adaptive Structures and Technologies

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2 Citations (Scopus)

A morphing trailing edge device for a wind turbine

Daynes, S. & Weaver, P. M., 1 Apr 2012, In : Journal of Intelligent Material Systems and Structures. 23, 6, p. 691-701 11 p.

Research output: Contribution to journalArticle (Academic Journal)

59 Citations (Scopus)

A Multifunctional Tape Spring Boom with Embedded Gas Lines and Flexible Printed Circuit Boards

Brinkmeyer, A., Reveles, J., Gurusamy, V., Pirrera, A., Weaver, P. & Lawton, M., 2017, 4th AIAA Spacecraft Structures Conference. Grapevine, Texas..

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

A multi-scale modelling method for tufted composites: Unit-cell model

Osmiani, C., Mohamed, G., Allegri, G. & Partridge, I., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

1 Citation (Scopus)

A multi-stable spanwise twist morphing trailing edge

Ai, Q. & Weaver, P. M., 9 Jan 2017, 25th AIAA/AHS Adaptive Structures Conference, 2017. American Institute of Aeronautics and Astronautics Inc. (AIAA), 13 p. AIAA 2017-0055

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
162 Downloads (Pure)

An advanced model for initiation and propagation of damage under fatigue loading, Part I: Model formulation

May, M. & Hallett, SR., 2011, In : Composite Structures. 93 (9), p. 2340 - 2349

Research output: Contribution to journalArticle (Academic Journal)

32 Citations (Scopus)

An advanced model for initiation and propagation of damage under fatigue loading - Part II: Matrix cracking validation cases

May, M. & Hallett, SR., 2011, In : Composite Structures. 93 (9), p. 2350 - 2357

Research output: Contribution to journalArticle (Academic Journal)

12 Citations (Scopus)

Analysis and Design for the Moderately Deep Postbuckling Behavior of Composite Plates

Wu, Z., Raju, G. & Weaver, P., Jan 2017, In : Journal of Aircraft. 54, 1, p. 327-335 9 p., C033875.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
1 Citation (Scopus)
253 Downloads (Pure)

Analysis of damage evolution in unidirectional carbon/epoxy samples under shear fatigue loading

May, M. & Hallett, SR., 2009, 17th International Conference on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Analysis of Delamination Migration in Laminated Composited using Conventional and Mesh-Independent Cohesive Zone Models

Pernice, M. F., Kawashita, L. F. & Hallett, S. R., Jul 2013, The 19th International Conference on Composite Materials ICCM19.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

38 Downloads (Pure)

Analysis of delamination migration in laminated composites using conventional and mesh-independent cohesive zone models

Pernice, M. F., Kawashita, L. F. & Hallett, S. R., 1 Jan 2013, p. 528-535. 8 p.

Research output: Contribution to conferenceConference Paper

5 Citations (Scopus)

Analysis of Geometrically Non-Linear Thin Laminated Shells for Morphing Applications

Lamacchia, E., Pirrera, A. & Weaver, P., 5 Sep 2016. 2 p.

Research output: Contribution to conferenceConference Abstract

Open Access
File
66 Downloads (Pure)

Analysis of novel hybrid joints for composite struts

Jones, J., Kawashita, L. F., Kim, B. C. & Hallett, S. R., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Analysis of peel arm curvature for the determination of fracture toughness in metal-polymer laminates

Kawashita, L. F., Moore, D. R. & Williams, J. G., 1 Sep 2005, In : Journal of Materials Science. 40, 17, p. 4541-4548 8 p.

Research output: Contribution to journalArticle (Academic Journal)

19 Citations (Scopus)

Analysis of skin-stringer debonding in composite panels through a two-way global-local method

Akterskaia, M., Jansen, E., Hallett, S. R., Weaver, P. & Rolfes, R., 15 Oct 2018, In : Composite Structures. 202, p. 1280-1294 15 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
14 Citations (Scopus)
164 Downloads (Pure)

Analytical solution for the fully coupled static response of variable stiffness composite beams

Masjedi, P. K. & Weaver, P. M., 2020, In : Applied Mathematical Modelling.

Research output: Contribution to journalArticle (Academic Journal)

2 Citations (Scopus)

An approach for dealing with high local stresses in finite element analyses

Helenon, FMM., Wisnom, MR., Hallett, SR. & Allegri, G., Jul 2009, 17th International Conference on Composite Materials, 27-31 July 2009, Edinburgh, UK.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

An approach for dealing with high local stresses in finite element analyses

Helenon, FMM., Wisnom, MR., Hallett, SR. & Allegri, G., Sep 2010, In : Composites Part A: Applied Science and Manufacturing. 41, 9, p. 1156 - 1163 8 p.

Research output: Contribution to journalArticle (Academic Journal)

12 Citations (Scopus)

An approach for dealing with high local stresses in finite element analyses

Helenon, F., Hallett, S., Wisnom, M. & Allegri, G., Sep 2010, In : Composites Part A: Applied Science and Manufacturing. 41, 9, p. 1156-1163 8 p.

Research output: Contribution to journalArticle (Academic Journal)

An approximate model of cylindrical and spherical contact on composite laminates of finite thickness

Gan, K. W., Wisnom, M. R. & Hallett, S. R., 1 Sep 2013, In : Composite Structures. 103, p. 136-142 7 p.

Research output: Contribution to journalArticle (Academic Journal)

7 Citations (Scopus)

An assessment of through-thickness shear tests for initiation of fatigue failure

May, M. & Hallett, SR., 2010, In : Composites Part A: Applied Science and Manufacturing. 41, 11, p. 1570-1578 9 p.

Research output: Contribution to journalArticle (Academic Journal)

25 Citations (Scopus)

An efficient semi-analytical framework to tailor snap-through loads in bistable variable stiffness laminates

Haldar, A., Groh, R., Jansen, E., Weaver, P. M. & Rolfes, R., 13 Mar 2020, In : International Journal of Solids and Structures.

Research output: Contribution to journalArticle (Academic Journal)

30 Downloads (Pure)

AN ENERGY-EQUIVALENT COHESIVE LAW FOR MODELLING Z-PINNED COMPOSITE LAMINATES

Melro, A. R., Serra, J., Allegri, G. & Hallett, S. R., 2019, ICCM22 Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

An E-shape broadband piezoelectric energy harvester induced by magnets

Lu, Q., Scarpa, F., Liu, L., Leng, J. & Liu, Y., 3 May 2018, In : Journal of Intelligent Material Systems and Structures. 29, 11, p. 2477-2491

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
5 Citations (Scopus)
232 Downloads (Pure)

A Neural Network Approach to Load Identification on a Wing Rib

Cooper, S. & Di Maio, D., Aug 2015, PROCEEDINGS OF THE FOURTH INTERNATIONAL CONFERENCE ON SOFT COMPUTING TECHNOLOGY IN CIVIL, STRUCTURAL AND ENVIRONMENTAL ENGINEERING. Tsompanakis, Y. & Topping, B. H. V. (eds.). 34

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

A new mechanism for the formation of ply wrinkles due to shear between plies

Lightfoot, J. S., Wisnom, M. R. & Potter, K., Jun 2013, In : Composites Part A: Applied Science and Manufacturing. 49, p. 139-147 9 p.

Research output: Contribution to journalArticle (Academic Journal)

57 Citations (Scopus)

A new optimisation framework for investigating wind turbine blade designs

Macquart, T., Maes, V., Langston, D., Pirrera, A. & Weaver, P., 6 Dec 2017, WCSMO 2017: Advances in Structural and Multidisciplinary Optimization. Springer Berlin Heidelberg, p. 2044-2060 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
260 Downloads (Pure)
31 Citations (Scopus)

A new semi-empirical model for stress ratio effect on mode II fatigue delamination growth

Allegri, G., Jones, M. I., Wisnom, M. R. & Hallett, S. R., Jul 2011, In : Composites Part A: Applied Science and Manufacturing. 42, 7, p. 733-740 8 p.

Research output: Contribution to journalArticle (Academic Journal)

60 Citations (Scopus)

A new wind turbine blade optimisation framework

Macquart, T., Weaver, P., Pirrera, A. & Langston, D., 26 May 2017. 1 p.

Research output: Contribution to conferenceConference Abstract

Open Access
File
77 Downloads (Pure)

An experimental and numerical investigation into damage mechanisms in tapered laminates under tensile loading

Zhang, B., Kawashita, L. F., Jones, M. I., Lander, J. & Hallett, S. R., 1 Jun 2020, In : Composites Part A: Applied Science and Manufacturing. 133, 13 p., 105862.

Research output: Contribution to journalArticle (Academic Journal)

An experimental and numerical study on fatigue damage development in laminates containing embedded wrinkle defects

Mukhopadhyay, S., Nixon-Pearson, O. J. & Hallett, S. R., 1 Feb 2018, In : International Journal of Fatigue. 107, p. 1-12 12 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
11 Citations (Scopus)
246 Downloads (Pure)

An experimental investigation into fatigue damage development in open and bolted hole specimens

Nixon-Pearson, O. J. & Hallett, S. R., 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

An Experimental Investigation into Multi-Functional Z-pinned Composite Laminates

Zhang, B., Allegri, G. & Hallett, S., 15 Oct 2016, In : Materials and Design. 108, p. 679-688 10 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
13 Citations (Scopus)
222 Downloads (Pure)

An experimental investigation into quasi-static and fatigue damage development in bolted-hole specimens

Nixon-Pearson, O. J. & Hallett, S. R., 1 Sep 2015, In : Composites Part B: Engineering. 77, p. 462-473 12 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
22 Citations (Scopus)
335 Downloads (Pure)

An experimental investigation into size effects in quasi-isotropic carbon/epoxy laminates with sharp and blunt notches

Xu, X., Wisnom, M. R., Mahadik, Y. & Hallett, S. R., 21 Aug 2014, In : Composites Science and Technology. 100, p. 220-227 8 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
44 Citations (Scopus)
296 Downloads (Pure)

An experimental investigation of the consolidation behaviour of uncured prepregs under processing conditions

Nixon-Pearson, O., Belnoue, J., Ivanov, D., Potter, K. & Hallett, S., Jun 2017, In : Journal of Composite Materials. 51, 13, p. 1911-1924 14 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
13 Citations (Scopus)
475 Downloads (Pure)

An improved delamination fatigue cohesive interface model for complex three-dimensional multi-interface cases

Tao, C., Mukhopadhyay, S., Zhang, B., Kawashita, L., Qiu, J. & Hallett, S., 1 Apr 2018, In : Composites Part A: Applied Science and Manufacturing. 107, p. 633-646 14 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
7 Citations (Scopus)
232 Downloads (Pure)

An integrated numerical model for investigating guided waves in impact-damaged composite laminates

Zhang, B., Sun, R., Eaton, M., Marks, R., Clarke, A., Featherston, C., Kawashita, L. & Hallett, S., 15 Sep 2017, In : Composite Structures. 176, p. 945–960 16 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
13 Citations (Scopus)
210 Downloads (Pure)

An international review of laser Doppler vibrometry: Making light work of vibration measurement

Rothberg, S. J., Allen, M. S., Castellini, P., Di Maio, D., Dirckx, J. J. J., Ewins, D. J., Halkon, B. J., Muyshondt, P., Paone, N., Ryan, T., Steger, H., Tomasini, E. P., Vanlanduit, S. & Vignola, J. F., 8 Nov 2016, In : Optics and Lasers in Engineering. 12 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
84 Citations (Scopus)
266 Downloads (Pure)

An investigation into the damage development of open hole specimens in fatigue

Nixon-Pearson, O. J., McCombe, G. P. & Hallett, S. R., 1 Jan 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

1 Citation (Scopus)

An investigation of in-plane performance of ultrahigh molecular weight polyethylene composites

Hazzard, M. K., Curtis, P. T., Iannucci, L., Hallett, S. & Trask, R., 1 Jan 2015.

Research output: Contribution to conferenceConference Paper

3 Citations (Scopus)

An iterative multiscale modelling approach for nonlinear analysis of 3D composites

Elsaied, B. S. F., Daghia, F., Ivanov, D. & Hallett, S., Feb 2018, In : International Journal of Solids and Structures. 132-133, p. 42-58 17 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
3 Citations (Scopus)
404 Downloads (Pure)