Research Output

2016
Open Access
File
8 Citations (Scopus)
247 Downloads (Pure)
Open Access
File
3 Citations (Scopus)
215 Downloads (Pure)

Variable stiffness composite laminates for rotating pre-twisted plates

Thomas, M., Weaver, P. & Hallett, S., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Vibroacoustic optimization of anti-tetrachiral and auxetic hexagonal sandwich panels with gradient geometry

Ranjbar, M., Boldrin, L., Scarpa, F., Neild, S. A. & Patsias, S., May 2016, In : Smart Materials and Structures. 25, 5, 14 p., 054012.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
17 Citations (Scopus)
279 Downloads (Pure)
2015

A cut-ply specimen for the mixed-mode fracture toughness and fatigue characterisation of FRPs

Charalambous, G., Allegri, G., Lander, J. K. & Hallett, S. R., 1 Jul 2015, In : Composites Part A: Applied Science and Manufacturing. 74, p. 77-87 11 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
9 Citations (Scopus)
247 Downloads (Pure)

Advanced numerical modelling techniques for the structural design of composite tidal turbine blades

Harper, P. W. & Hallett, S. R., 1 Mar 2015, In : Ocean Engineering. 96, p. 272-283 12 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
12 Citations (Scopus)
332 Downloads (Pure)

Aeroelastic tailoring using crenelated skins - Modelling and experiment

Francois, G., Cooper, J. E. & Weaver, P. M., 2015, International Forum on Aeroelasticity and Structural Dynamics, IFASD 2015. International Forum on Aeroelasticity and Structural Dynamics (IFASD)

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

1 Citation (Scopus)

A mixed-variational, higher-order zig-zag theory for highly heterogeneous layered structures

Groh, R. & Weaver, P., 2015.

Research output: Contribution to conferenceConference Abstract

A Neural Network Approach to Load Identification on a Wing Rib

Cooper, S. & Di Maio, D., Aug 2015, PROCEEDINGS OF THE FOURTH INTERNATIONAL CONFERENCE ON SOFT COMPUTING TECHNOLOGY IN CIVIL, STRUCTURAL AND ENVIRONMENTAL ENGINEERING. Tsompanakis, Y. & Topping, B. H. V. (eds.). 34

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

An experimental investigation into quasi-static and fatigue damage development in bolted-hole specimens

Nixon-Pearson, O. J. & Hallett, S. R., 1 Sep 2015, In : Composites Part B: Engineering. 77, p. 462-473 12 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
21 Citations (Scopus)
327 Downloads (Pure)

An investigation of in-plane performance of ultrahigh molecular weight polyethylene composites

Hazzard, M. K., Curtis, P. T., Iannucci, L., Hallett, S. & Trask, R., 1 Jan 2015.

Research output: Contribution to conferenceConference Paper

3 Citations (Scopus)

A numerical investigation into size effects in centre-notched quasi-isotropic carbon/epoxy laminates

Xu, X., Wisnom, M. R., Li, X. & Hallett, S. R., 6 May 2015, In : Composites Science and Technology. 111, p. 32-39 8 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
37 Citations (Scopus)
286 Downloads (Pure)
Open Access

A series elastic composite actuator for soft arm exosuits

Cappello, L., Pirrera, A., Weaver, P. M. & Masia, L., 28 Sep 2015, 2015 IEEE International Conference on Rehabilitation Robotics (ICORR 2015): Proceedings of a meeting held 11-14 August 2015, Singapore. Institute of Electrical and Electronics Engineers (IEEE), p. 61-66 6 p. 7281176. (Proceedings of the IEEE International Conference on Rehabilitation Robotics (ICORR)).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
11 Citations (Scopus)
387 Downloads (Pure)

Auxetics and other systems of negative characteristics

Wojciechowski, KW., Scarpa, F., Grima, JN. & Alderson, A., 14 Jul 2015, In : physica status solidi (b). 252, 7, p. 1421-1425 4 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
17 Citations (Scopus)
241 Downloads (Pure)

Buckling analysis and optimization of blade stiffened variable stiffness panels

Coburn, B. H., Wu, Z. & Weaver, P. M., 2015, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics Inc. (AIAA)

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

9 Citations (Scopus)

Buckling and postbuckling behaviour of glare laminates containing splices and doublers: experimental and numerical investigation

Al-Azzawi, A., McCrory, J., Kawashita, L., Featherston, C., Pullin, R. & Holford, K., 2015, 3rd International Conf erence on Buckling and Postbuckling Behaviour of Composite Laminated Structures.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Buckling and postbuckling of variable angle tow composite plates under in-plane shear loading

Raju, G., Wu, Z. & Weaver, P. M., 1 Jan 2015, In : International Journal of Solids and Structures. 58, p. 270-287 18 p.

Research output: Contribution to journalArticle (Academic Journal)

37 Citations (Scopus)

Cellular plates with auxetic rectangular perforations

Slann, A., White, W., Scarpa, F., Boba, K. & Farrow, I., 1 Jan 2015, (Accepted/In press) In : physica status solidi (b).

Research output: Contribution to journalArticle (Academic Journal)

44 Citations (Scopus)

Cementitious composites with rubber particles from recycled tyres: Physical and mechanical properties

Santos, R. M., Ferreira, F. B. S., Panzera, T. H., Borges, P. H. R. & Scarpa, F., 2015, In : Journal of Sustainable Development. 8, 6, p. 1-15 15 p.

Research output: Contribution to journalArticle (Academic Journal)

3 Citations (Scopus)

Composite chiral shear vibration damper

Agnese, F., Remillat, C., Scarpa, F. & Payne, C., 5 Nov 2015, In : Composite Structures. 132, p. 215-225 11 p.

Research output: Contribution to journalArticle (Academic Journal)

9 Citations (Scopus)

Compressive failure of laminates containing an embedded wrinkle: experimental and numerical study

Mukhopadhyay, S., Jones, M. I. & Hallett, S. R., Jun 2015, In : Composites Part A: Applied Science and Manufacturing. 73, p. 132-142 11 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
52 Citations (Scopus)
541 Downloads (Pure)

Computer aided modelling of variable angle tow composites manufactured by continuous tow shearing

Kim, B. C., Weaver, P. M. & Potter, K., 1 Oct 2015, In : Composite Structures. 129, p. 256-267 12 p.

Research output: Contribution to journalArticle (Academic Journal)

23 Citations (Scopus)

Concept for morphing airfoil with zero torsional stiffness

Daynes, S., Lachenal, X. & Weaver, P. M., 1 Sep 2015, In : Thin-Walled Structures. 94, p. 129-134 6 p.

Research output: Contribution to journalArticle (Academic Journal)

9 Citations (Scopus)

Control of Compressive Fatigue Delamination Propagation of Impact Damaged Composites Using Discrete Thermoplastic Interleaves

Yasaee, M., Killock, C., Hartley, J. W. & Bond, I. P., 15 Oct 2015, In : Applied Composite Materials. 22, 5, p. 559-572 14 p.

Research output: Contribution to journalArticle (Academic Journal)

File
8 Citations (Scopus)
359 Downloads (Pure)

Damage assessment of fibre reinforced laminates

Durão, L. M. P., Panzera, T. H., Scarpa, F., Filho, S. L. M. R. & Oliveira, P. R., 1 Dec 2015, In : Composite Structures. 133, p. 939-946 8 p., 6718.

Research output: Contribution to journalArticle (Academic Journal)

10 Citations (Scopus)

Damage estimation in nonlinear laminates subjected to a transverse concentrated load

Suemasu, H., Wisnom, M., Sun, R. & Hallett, S., 24 Jul 2015. 10 p.

Research output: Contribution to conferenceConference Paper

Open Access
File
2 Citations (Scopus)
95 Downloads (Pure)

Damage-tolerant composite structures by Z-pinning: Chapter 6

Partridge, I., Yasaee, M., Allegri, G. & Lander, J., 2015, Toughening mechanisms in composite materials. Qin, Q. & Ye, J. (eds.). Woodhead Publishing Limited, p. 161-189 29 p. (Composites Science and Engineering; no. 55).

Research output: Chapter in Book/Report/Conference proceedingChapter in a book

6 Citations (Scopus)

Delamination measurement for composite structures - Method 2

Zhang, B., Jul 2015, (Accepted/In press) Patent No. GB1511686.6

Research output: Patent

Delamination resistance of composites using inclined Z-pins

M'Membe, B., Gannon, S., Yasaee, M., Hallett, S. R. & Partridge, I. K., 24 Jul 2015, Proceedings of the 20th International Conference on Composite Materials (ICCM20). International Conference on Composite Materials, ICCM, 8 p. 2116-2

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
1 Citation (Scopus)
72 Downloads (Pure)

Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance

Ma, X., Scarpa, F., Peng, H-X., Allegri, G., Yuan, J. & Ciobanu, R., 1 Dec 2015, In : Aerospace Science and Technology. 47, p. 367-377 11 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
38 Citations (Scopus)
399 Downloads (Pure)

Development of shape morphing Kirigami honeycombs and actuation methods

Neville, R. M. & Scarpa, F., 24 Jul 2015, Proceedings of the 20th International Conference on Composite Materials (ICCM20). International Conference on Composite Materials, ICCM, 10 p. P205-17

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
148 Downloads (Pure)

Development of testing methods for endurance trials of composites components

Di Maio, D. & Magi, F., 1 Oct 2015, In : Journal of Composite Materials. 49, 24, p. 2977-2991 15 p.

Research output: Contribution to journalArticle (Academic Journal)

Dielectric cure monitoring of a fast curing resin system

Martin, F. A., Koutsomitopoulou, A. F., Partridge, I. K. & Skordos, A. A., 1 Jan 2015.

Research output: Contribution to conferenceConference Paper

3 Citations (Scopus)

Direct Matrix Updating Method For Structural Models Based on Measured Response

Cooper, S., Di Maio, D. & Delli Carri, A., Sep 2015, Proceedings of ICOeV2015, International Conference on Engineering Vibration. Boltezar, M. & Wieciegoch, M. (eds.). p. 308 317 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Dynamic response of a geotechnical rigid model container with absorbing boundaries

Lombardi, D., Bhattacharya, S., Scarpa, F. & Bianchi, M., 1 Feb 2015, In : Soil Dynamics and Earthquake Engineering. 69, p. 46-56 11 p.

Research output: Contribution to journalArticle (Academic Journal)

29 Citations (Scopus)

Effect of insert material on artificial delamination performance in composite laminates

Le Cahain, Y. M., Noden, J. & Hallett, S. R., 18 Sep 2015, In : Journal of Composite Materials. 49, 21, p. 2589-2597 9 p.

Research output: Contribution to journalArticle (Academic Journal)

5 Citations (Scopus)
72 Downloads (Pure)

Experimental and numerical analysis of peel failure between alumina ceramics and glass fibre-reinforced composites

Thorvaldsen, T., Johnsen, B. B., Jones, T. P., Rahbek, D. B. & Kawashita, L. F., 1 Jan 2015.

Research output: Contribution to conferenceConference Paper

1 Citation (Scopus)

Experimental model validation of a non-linear structure with lap-joint using the physical space approach

Delli Carri, A., Di Maio, D., Lucchetti, A. & Sever, I. A., Jan 2015, 26th International Conference on Noise and Vibration Engineering (IMSA 2014): Held in Conjunction with the 5th International Conference on Uncertainty in Structural Dynamics (USD 2014). Sas, P., Moens, D. & Denayer, H. (eds.). Katholieke Universiteit Leuven, Vol. 1. p. 1185-1198 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
2 Citations (Scopus)
113 Downloads (Pure)

Experimental Study on Delamination Migration in Composite Laminates

Pernice, M. F., De Carvalho, N. V., Ratcliffe, J. G. & Hallett, S. R., 2015, In : Composites Part A: Applied Science and Manufacturing. 73, p. 20-34 15 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
40 Citations (Scopus)
536 Downloads (Pure)

Field/stress tunable behaviour of composites containing the combined current-modulation annealed ferromagnetic microwires

Luo, Y., Scarpa, F., Qin, F., Liu, J., Wang, H., Brosseau, C., Xing, D., Sun, J. & Peng, H., 14 Jul 2015, 2015 IEEE International Magnetics Conference, INTERMAG 2015. Institute of Electrical and Electronics Engineers (IEEE), 7156856

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
213 Downloads (Pure)

Framework for the Buckling Optimization of Variable-Angle Tow Composite Plates

Wu, Z., Raju, G. & Weaver, P. M., Dec 2015, In : AIAA Journal. 53, 12, p. 3788-3804 17 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
58 Citations (Scopus)
316 Downloads (Pure)

Full-field stress tailoring of composite laminates

Groh, R. & Weaver, P., 2015.

Research output: Contribution to conferenceConference Paper

Open Access
2 Citations (Scopus)

Hybrid glass fibre reinforced composites with micro and poly-diallyldimethylammonium chloride (PDDA) functionalized nano silica inclusions

Santos, J. C., Vieira, L. M. G., Panzera, T. H., Schiavon, M. A., Christoforo, A. L. & Scarpa, F., Jan 2015, In : Materials and Design. 65, p. 543-549 7 p.

Research output: Contribution to journalArticle (Academic Journal)

22 Citations (Scopus)

Identification of dynamic nonlinearities of bolted structures using strain analysis

Di Maio, D., 14 Aug 2015, Nonlinear Dynamics, Volume 1: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015. Kerschen, G. (ed.). Springer, p. 387-414 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
3 Citations (Scopus)
278 Downloads (Pure)

Improving the damage tolerance of composite joints with tufting

Kratz, J., Clegg, H., Dell'Anno, G. & Partridge, I. K., 24 Jul 2015, Proceedings of the 20th International Conference on Composite Materials (ICCM20). International Conference on Composite Materials, ICCM, 9 p. 3410-3

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
2 Citations (Scopus)
156 Downloads (Pure)

Internal geometric modelling of 3D woven composites: A comparison between different approaches

Isart, N., El Said, B., Ivanov, D. S., Hallett, S. R., Mayugo, J. A. & Blanco, N., 5 Nov 2015, In : Composite Structures. 132, p. 1219-1230 12 p.

Research output: Contribution to journalArticle (Academic Journal)

36 Citations (Scopus)
31 Downloads (Pure)

Machining behaviour of three high-performance engineering plastics

Campos Rubio, J. C., Panzera, T. H. & Scarpa, F., 1 Jan 2015, In : Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 229, 1, p. 28-37 10 p.

Research output: Contribution to journalArticle (Academic Journal)

8 Citations (Scopus)

Manufacturing Characteristics of the Continuous Multi-Tow Shearing for High-Volume Manufacturing of Tow-Steered Composites

Zympeloudis, E. D., Weaver, P., Potter, K. & Kim, B. C., 24 Jul 2015, Proceedings of the 20th International Conference on Composite Materials (ICCM20). International Conference on Composite Materials, ICCM, 10 p. 4217-4

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
158 Downloads (Pure)