Specialist Research Institutes

Research Output

Filter
Conference Contribution (Conference Proceeding)
2020

A comparative assessment of 3D wovens and non-crimp fabrics under three point bending

Gill, V. & Potter, K., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Analysis of novel hybrid joints for composite struts

Jones, J., Kawashita, L. F., Kim, B. C. & Hallett, S. R., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

An analytical model for granular jamming beams with applications in morphing aerostructures

Brigido, J. D., Burrow, S. G. & Woods, B. K. S., 5 Jan 2020, AIAA SciTech Forum and Exposition 2020. American Institute of Aeronautics and Astronautics Inc. (AIAA), 17 p. AIAA 2020-1038

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
57 Downloads (Pure)

A practice theory view of the temporality of mothering routines to inform physical activity social marketing programmes

Spotswood, F., Nobles, J. D. & Armstrong, M. E. G., 29 Jan 2020, (Unpublished) University of Bath Qualitative Research Symposium.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Bearing failure of pseudo-ductile thin ply angle-ply laminates

Wu, X., Fotouhi, M., Fuller, J. D. & Wisnom, M. R., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Cactus-based solids and bio-composites for energy dissipation in defence and biomedical applications.

Zampetakis, I., Hetherington, A., Perriman, A. & Scarpa, F., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Clinicians views and experiences of implementing a complex intervention to reduce antibiotic prescribing in children with Respiratory Tract Infections in primary care.

Clement, C., Ingram, J. C., Cabral, C. L., Blair, P. S., Lucas, P. J. & Horwood, J. P., 2020, South West Society for Academic Primary Care (SAPC) Conference 2020.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access

Developing a high-fidelity knowledge base for improvements in the nondestructive testing of advanced composite material products

Gandhi, N. H., Rose, R., Croxford, A. J. & Ward, C., 25 May 2020, (Accepted/In press) PROCEDIA MANUFACTURING. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Development of a closed-loop recycling process for highly aligned discontinuous carbon fibre thermoplastic composites

Tapper, R. J., Longana, M. L., Yu, H. N., Hamerton, I. & Potter, K. D., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Development of discontinuous fibre reinforced thermoplastic feedstocks for high performance 3D printing

Blok, L. G., Yu, H., Longana, M. L. & Woods, B. K. S., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

DNA methylation and response to steroids in children with nephrotic syndrome [Abstract]

Hayward, S. J. L., Suderman, M. J., Bierzynska, A., Welsh, G. I. & Saleem, M., 6 Jun 2020, 57th ERA-EDTA Congress Abstracts : Sunday, 7th June 2020: Free Communications + Symposia (sorted by session). Oxford University Press, Vol. 35. MO075. (Nephrology Dialysis Transplantation).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Durability of composite materials in deployable structures for space applications

He, Y., Suliga, A., Brinkmeyer, A., Schenk, M. & Hamerton, I., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Effect of charge placement on fibre orientation, distortion and failure of a carbon fibre reinforced sheet moulding compound

Kite, S. F., Nixon-Pearson, O., Ogin, S. L., Jesson, D. A., Hamerton, I., Meeks, G. & Sordon, A., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Effect of processing parameters on quality and strength in thermoplastic composite injection overmoulded components

Valverde, M. A., Kupfer, R., Kawashita, L. F., Gude, M. & Hallett, S. R., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Eliminating the need for gel-coat surfaces in composites

Sivanathan, L., Atkins, G., Ward, C. & Koutsomitopoulou, A., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Failure behaviour of composites under both vibration loading and environmental conditions

Voudouris, G., Di Maio, D. & Sever, I., 1 Jan 2020, Model Validation and Uncertainty Quantification, Volume 3 - Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019. Barthorpe, R. (ed.). Springer New York LLC, Vol. 3. p. 25-32 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

High cycle vibration fatigue of CFRP under elevated ambient temperatures

Voudouris, G., Maio, D. D. & Sever, I., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Improving the quality of thermoplastic composite corners using laser-assisted tape placement

Peeters, D., Jones, D., O'Higgins, R. & Weaver, P. M., 2020, ECCM 2018 - 18th European Conference on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Innovative preform design exploiting automated fibre placement

Zivkovic, P., Ward, C. & Marengo, G., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Morphino: A Nature-Inspired Tool for the Design of Shape-Changing Interfaces

Qamar, I. P. S., Goguey, A., Stawarz, K., Coutrix, C., Robinson, S. & Roudaut, A., 9 Apr 2020, (Accepted/In press) DIS '20. Association for Computing Machinery (ACM)

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Mothering routines, the family nexus and physical activity: Using practice theory to advance social marketing thinking

Spotswood, F., Nobles, J. D. & Armstrong, M. E. G., 21 Apr 2020, (Unpublished) British Sociological Association.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Natural fibers actuators for smart bio-inspired hygromorph biocomposites

Le Duigou, A., Beaugrand, J., Scarpa, F. & Castro, M., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Numerical and experimental modal analysis of a cantilever beam axially loaded by a tendon which is attached in a single spanwise location

Ondra, V. & Titurus, B., 1 Jan 2020, Topics in Modal Analysis and Testing, Volume 8 - Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019: Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019. Mains, M. L. & Dilworth, B. J. (eds.). Springer New York LLC, p. 107-116 10 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2 Citations (Scopus)

Numerically Efficient Three-Dimensional Fluid-Structure Interaction Analysis for Composite Camber Morphing Aerostructures

Rivero, A. E., Cooper, J. E. & Woods, B. K. S., 5 Jan 2020, AIAA Scitech 2020 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), 15 p. 2020-1298

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
66 Downloads (Pure)

Patient and ophthalmic care provider perceptions of cataract surgery outcome: Findings from an exploratory qualitative study

Pithara, C., Donovan, J. L., Elliott, D., Sparrow, J. M., Grzeda, M. T. & Fox, F. E., 2020, HSR UK.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Rate-dependent modelling of the meso-mechanics of z-pins bridging mixed mode delaminations

Hijazi, H., Cui, H., Allegri, G., Hallett, S. R. & Petrinic, N., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Reduced tensile notch-sensitivity in pseudo-ductile thin-ply composites

Wisnom, M. R., Czél, G., Fotouhi, M., Fuller, J., Jalalvand, M., Rev, T. & Wu, X., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Responses to nuisance bleeding and medication concerns when on Dual Antiplatelet Therapy

Pithara, C., Pufulete, M. M., Redwood, S. M. & Johnson, T. W., 2020, HSR UK.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Self-warning hybrid composite patches for repairing cracked aluminium panels

Jalalvand, M., Wu, H. W. M. L., Sheibanian, F., Fotouhi, M. & Wisnom, M. R., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Solvent-free, liquid processable Bt resin/glass fibre reinforced composites

Iredale, R. J. & Hamerton, I., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Switching of amorphous silicon thin-film actuators for optically functional robotic devices

Gillespie, C., Marzo, A., Scarpa, F., Rossiter, J. & Conn, A. T., 26 Apr 2020, Proceedings of the SPIE, Electroactive Polymer Actuators and Devices (EAPAD) XXII. Society of Photo-Optical Instrumentation Engineers (SPIE), Vol. 11375. 113751O (2020)

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

1 Downloads (Pure)

The effect of test temperature on the pseudo-ductility of thin-ply hybrid composites

Czél, G., Bugár-Mészáros, M. & Wisnom, M. R., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

The HipERDIF (High performance discontinuous fibres) technology for the manufacturing of pseudo-ductile quasi-isotropic aligned discontinuous fibre composites

Longana, M. L., Yu, H. N., Potter, K. D., Wisnom, M. R. & Hamerton, I., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Thin ply carbon/glass hybrid laminates to activate new damage mechanisms under indentation

Fotouhi, M., Jalalvand, M., Prato, A. & Wisnom, M. R., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Visualising Compliance of Composite Shell Mechanisms

Stacey, J., O'Donnell, M. P., Schenk, M. & Kim, C. J., 6 Apr 2020, (Accepted/In press) Proceedings of the ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE 2020). American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Wind Tunnel Comparison of Flapped and FishBAC Camber Variation for Lift Control

Rivero, A. E., Fournier, S. F. B., Manolesos, M., Cooper, J. E. & Woods, B. K. S., 5 Jan 2020, AIAA Scitech 2020 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), AIAA 2020-1300

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
31 Downloads (Pure)
2019

Adolescent cancer risk exposures predict intermediate cancer risk outcomes at age 24 years: A longitudinal analysis using ALSPAC data.

Wright, C. L., Hickman, M., Heron, J. E., Kipping, R. R., Campbell, R. M. & Martin, R. M., 1 Nov 2019, National Cancer Research Institute Conference.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Aeroelastic eigenvalue analysis of a variable speed rotor blade with an applied compressive load

Dibble, R., Ondra, V., Woods, B. K. S. & Titurus, B., 6 Jan 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
3 Citations (Scopus)
115 Downloads (Pure)

An active tendon concept in rotorcraft with variable speed rotors: free vibration perspective: Free vibration perspective

Ondra, V., Dibble, R. P., Titurus, B. & Woods, B. K. S., 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

4 Citations (Scopus)

AN ENERGY-EQUIVALENT COHESIVE LAW FOR MODELLING Z-PINNED COMPOSITE LAMINATES

Melro, A. R., Serra, J., Allegri, G. & Hallett, S. R., 2019, ICCM22 Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

A SMEARED COHESIVE LAW FOR MODELLING Z-PINNED COMPOSITE LAMINATES’ DELAMINATION

Melro, A. R., Serra, J., Allegri, G. & Hallett, S. R., 2019, 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Body weight, eating behaviour and physical activity practices among Chilean women from different socioeconomic positions

Vega Salas, M. J., Papadaki, A. & Johnson, L., Sep 2019, BSA Medical Sociology Study Group 51st Annual Conference Programme. York: BSA Publications Ltd., p. 53 59 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Bringing together the “pieces of the puzzle”: a qualitative study of how trainee research networks and collaborators can work together to optimise trial conduct

Clement, C., Coulman, K. D., Pinkey, T., Blazeby, J. M., Blencowe, N. S., Heywood, N., Cook, J., Bulbulia, R., Marson, T. & Lane, J. A., 22 Oct 2019, Meeting abstracts from the 5th International Clinical Trials Methodology Conference (ICTMC 2019).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access

Can we promote walking as urban transport?

Audrey, S. & Fisher, H., 30 Jan 2019, Urban Transport XXIV: Urban Transport and the Environment 2018. Riejos, . N. F. A. O. (ed.). WITPress, Vol. 182. p. 327-338 12 p. (WIT Transactions on The Built Environment; vol. 182).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
1 Citation (Scopus)
134 Downloads (Pure)

Compact telescopic morphing lattice boom

McHale, C., Telford, R. & Weaver, P. M., 2019, ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2019.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Comparing the effect of geometry and stiffness on the effective load paths in non-symmetric laminates

Minera Rebulla, S., Patni, M., Weaver, P., Pirrera, A. & O'Donnell, M., 7 Jan 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), 13 p. AIAA 2019-1766. (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
217 Downloads (Pure)

Computational Analysis of the Aerodynamics of Camber Morphing

Huntley, S., Allen, C. & Woods, B. K. S., 2019, AIAA paper 2019-2914, Proceedings AIAA AVIATION 2019, Dallas, TX, June 2019.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access

Computational fluid dynamics methodology for characterisation of leading edge erosion in whirling arm test rigs

Herring, R., Dyer, K., MacLeod, A. & Ward, C., 21 May 2019, WindEurope Conference and Exhibition 2019: Delivering a Clean Economy for All European: Proceedings of a meeting held 2-4 April 2019, Bibao, Spain.. 1 ed. Vol. 1222. 11 p. 012011. (Journal of Physics: Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
114 Downloads (Pure)

Developing an intervention to implement electronic patient-reported outcomes in renal services in the UK

Van Der Veer, S., Ercia, A., Caskey, F. J., Farrington, K., Jury, F., Rees, M., Whitlock, T. L. & Knowles, S., 19 Dec 2019, (Accepted/In press) Medical Informatics Europe Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Development of High Performance Discontinuous Fibres - Fibre Surface Modification

Pozegic, T., Longana, M. L., Huntley, S. J., He, S., Bandara, I., King, S. & Hamerton, I., Aug 2019, TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)