Mr Carwyn Ward

B.Eng. (Hons), M.Res.(Wales), PhD

  • BS8 1TR

20082020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2017

The Dibber: Designing a standardised handheld tool for lay-up tasks

Jones, H., Roudaut, A., Chatzimichali, A., Potter, K. & Ward, C., Nov 2017, In : Applied Ergonomics. 65, p. 240-254 15 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
260 Downloads (Pure)

The manufacture of honeycomb cores using Fused Deposition Modeling

Pollard, D. P., Ward, C., Herrmann, G. & Etches, J. A., 2017, In : Advanced Manufacturing: Polymer and Composites Science. 3, 1, p. 21-31 11 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
11 Citations (Scopus)
853 Downloads (Pure)

Using real-time data for increasing the efficiency of the automated fibre placement process

Winter, D., Crowley, D., Ward, C., Williams, S., McMahon, C. & Potter, K., 2017, In : International Journal of Vehicle Structures and Systems. 9, 1, p. 11-16 6 p.

Research output: Contribution to journalArticle (Academic Journal)

1 Citation (Scopus)
2018

A comparison of FDM structural layouts and implementation of an open-source arm-based system

Pollard, D., Herrmann, G., Ward, C. & Etches, J., 30 Apr 2018, 2018 3rd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2018) – 2018 3rd International Conference on Design, Engineering and Science (ICDES 2018). EDP Sciences, Vol. 167. 6 p. 03002. (MATEC Web of Conferences).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
3 Citations (Scopus)
264 Downloads (Pure)

Application of an arm-based FDM system for sandwich panel fabrication

Pollard, D., Herrmann, G., Ward, C. & Etches, J., 24 Jun 2018. 8 p.

Research output: Contribution to conferenceConference Paper

Open Access
File
68 Downloads (Pure)
Open Access
File
25 Downloads (Pure)

The Processing of a Novel Polymer Matrix for Wind Turbine Blades

Russell, B., Ward, C., Takeda, S. & Hamerton, I., 27 Sep 2018. 3 p.

Research output: Contribution to conferenceConference Paper

Open Access
File
33 Downloads (Pure)
2019

Computational fluid dynamics methodology for characterisation of leading edge erosion in whirling arm test rigs

Herring, R., Dyer, K., MacLeod, A. & Ward, C., 21 May 2019, WindEurope Conference and Exhibition 2019: Delivering a Clean Economy for All European: Proceedings of a meeting held 2-4 April 2019, Bibao, Spain.. 1 ed. Vol. 1222. 11 p. 012011. (Journal of Physics: Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
120 Downloads (Pure)

Developing a High-Fidelity Knowledge Base for Non-Destructive Testing and Composite Material Products: A Review

Gandhi, N. H., Rose, R., Croxford, A. J. & Ward, C., 5 Sep 2019. 12 p.

Research output: Contribution to conferenceConference Paper

Open Access
File
71 Downloads (Pure)
1 Citation (Scopus)

Layup end effectors with tactile sensing capabilities

Elkington, M., Ward, C., Ward-Cherrier, B., Lepora, N., Pestell, N. & Almas, E., 26 Apr 2019, Proceedings of the 4th Symposium on Automated Composite Manufacturing. V. Hoa, S. (ed.). Concordia University Press

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

LayupRITE: Manufacturing Support Tools for the Composites Industry

Crowley, D. M., Ward, C., Rider, L., Shakspeare, P., Thornton, B. & Edwards, S., Nov 2019, In : Sampe journal. November/December 2019, p. 36-43 7 p.

Research output: Contribution to journalArticle (Academic Journal)

The increasing importance of leading edge erosion and a review of existing protection solutions

Herring, R., Dyer, K., Martin, F. & Ward, C., 1 Nov 2019, In : Renewable and Sustainable Energy Reviews. 115, 13 p., 109382.

Research output: Contribution to journalReview article (Academic Journal)

Open Access
File
6 Citations (Scopus)
186 Downloads (Pure)

Understanding of Leading-Edge Protection Performance Using Nano-Silicates for Modification

Ouachan, I., Kuball, M., Liu, D., Dyer, K., Ward, C. & Hamerton, I., 21 May 2019, WindEurope Conference and Exhibition 2019: Delivering a Clean Economy for All European: Proceedings of a meeting held 2-4 April 2019, Bibao, Spain. 1 ed. Vol. 1222. 11 p. 012016. (Journal of Physics: Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
1 Citation (Scopus)
142 Downloads (Pure)
2020

Characterisation of the Offshore Precipitation Environment to Help Combat Leading Edge Erosion of Wind Turbine Blades

Herring, R., Dyer, K., Howkins, P. & Ward, C., 9 Feb 2020, (Submitted) In : Wind Energy Science.

Research output: Contribution to journalSpecial issue (Academic Journal)

Developing a high-fidelity knowledge base for improvements in the nondestructive testing of advanced composite material products

Gandhi, N. H., Rose, R., Croxford, A. J. & Ward, C., 25 May 2020, (Accepted/In press) PROCEDIA MANUFACTURING. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Eliminating the need for gel-coat surfaces in composites

Sivanathan, L., Atkins, G., Ward, C. & Koutsomitopoulou, A., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Flexible Low-Cost Tooling Solutions for a One-Shot Resin Infusion of a 3D Woven and Multi-Textile Preform

Budwal, N., Ward, C., Kasper, K. & Goering, J., 5 May 2020, (Accepted/In press) In : Procedia Manufacturing.

Research output: Contribution to journalArticle (Academic Journal)

Innovative preform design exploiting automated fibre placement

Zivkovic, P., Ward, C. & Marengo, G., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Thermoformability characterisation of Flax reinforced polypropylene composite materials

Dobah, Y., Zampetakis, I., Ward, C. & Scarpa, F., 1 Mar 2020, In : Composites Part B: Engineering. 184, 23 p., 107727.

Research output: Contribution to journalArticle (Academic Journal)

3 Citations (Scopus)