Mr Carwyn Ward

B.Eng. (Hons), M.Res.(Wales), PhD

  • BS8 1TR

20082020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Effect of tufting density and loop length on the crushing behaviour of tufted sandwich specimens

Hartley, J., Kratz, J., Ward, C. & Partridge, I., 1 Mar 2017, In : Composites Part B: Engineering. 112, p. 49-56 8 p.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
12 Citations (Scopus)
272 Downloads (Pure)

Draping processes for composites manufacture

Potter, K. & Ward, C., 27 Jul 2015, Advances in Composites Manufacturing and Process Design. JAI-Elsevier Science Inc, p. 93-109 17 p.

Research output: Chapter in Book/Report/Conference proceedingChapter in a book

1 Citation (Scopus)

Development of the manufacture of complex composite panels

Ward, C., Hazra, K. & Potter, K., 2011, In : International Journal of Materials and Product Technology. 42, p. 131 - 155 No.3/4.

Research output: Contribution to journalArticle (Academic Journal)

15 Citations (Scopus)

Developing a High-Fidelity Knowledge Base for Non-Destructive Testing and Composite Material Products: A Review

Gandhi, N. H., Rose, R., Croxford, A. J. & Ward, C., 5 Sep 2019. 12 p.

Research output: Contribution to conferenceConference Paper

Open Access
File
72 Downloads (Pure)

Developing a high-fidelity knowledge base for improvements in the nondestructive testing of advanced composite material products

Gandhi, N. H., Rose, R., Croxford, A. J. & Ward, C., 25 May 2020, (Accepted/In press) PROCEDIA MANUFACTURING. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Developing a cost comparison technique for hand lay-up versus automated fibre placement and infusion versus out-of-autoclave

Bauswein, Y., Veldenz, L. & Ward, C., 14 Nov 2017. 8 p.

Research output: Contribution to conferenceConference Paper

Open Access
File
81 Downloads (Pure)

Cure rate tailoring of thick composites via temperature controlled vascular pathways

O'Donnell, M. P., Mahadik, Y. & Ward, C., 4 Jan 2016, 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics Inc. (AIAA), 14 p. 0161

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
372 Downloads (Pure)

Computational fluid dynamics methodology for characterisation of leading edge erosion in whirling arm test rigs

Herring, R., Dyer, K., MacLeod, A. & Ward, C., 21 May 2019, WindEurope Conference and Exhibition 2019: Delivering a Clean Economy for All European: Proceedings of a meeting held 2-4 April 2019, Bibao, Spain.. 1 ed. Vol. 1222. 11 p. 012011. (Journal of Physics: Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
125 Downloads (Pure)

COMPRESSIBILITY OF COMPLEX 3D BRAIDED ARCHITECTURES

Mahadik, Y., Scrimshaw, C., Ward, C. & Ivanov, D., 2013, COMPOSITES WEEK @ LEUVEN AND TEXCOMP-11 CONFERENCE. 16-20 SEPTEMBER 2013, LEUVEN.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Column Interaction in Tufted Sandwich Structures Under Edgewise Loading

Hartley, J. W., Tse, G., Kratz, J., Ward, C. & Partridge, I. K., 30 Jun 2016, ECCM17 - 17th European Conference on Composite Materials: Munich, German, 26-30 June 2016. European Conference on Composite Materials, ECCM, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
154 Downloads (Pure)

Collaborative Human-Robotic layup

Elkington, M., Ward, C., Kirby, A., Libby, M. & Gandhi, N., 14 Dec 2017, Composites Advanced Manufacturing Exposition 2017. Orlando Florida, 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Characterisation of the Offshore Precipitation Environment to Help Combat Leading Edge Erosion of Wind Turbine Blades

Herring, R., Dyer, K., Howkins, P. & Ward, C., 9 Feb 2020, (Submitted) In : Wind Energy Science.

Research output: Contribution to journalSpecial issue (Academic Journal)

Automated Layup of Sheet Prepregs on Complex Moulds

Elkington, M. P., Ward, C. & Potter, K. D., 24 Jun 2016, International SAMPE Technical Conference. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
9 Citations (Scopus)
327 Downloads (Pure)

Automated layup of sheet prepregs on complex moulds

Elkington, M., Ward, C. & Potter, K. D., 7 Jul 2016, In : Journal of Advanced Materials. 3, p. 70-84 14 p., 5.

Research output: Contribution to journalArticle (Academic Journal)

Open Access
File
324 Downloads (Pure)

Automated composite draping: a review

Elkington, M., Ward, C. & Sarkytbayev, A., 25 May 2017, SAMPE 2017. SAMPE North America, 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
455 Downloads (Pure)

A study of the pressure distribution in the hand layup and vacuum bagging processes

Bloom, L. D., Napper, M. A., Ward, C. & Potter, K., 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

A status of acceptance criteria and process requirements in advanced composites manufacturing, and whether they are fit for purpose

Crowley, D. M., Ward, C. & Potter, K., 19 Dec 2013, SAE Technical Papers. Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

6 Citations (Scopus)

Application of an arm-based FDM system for sandwich panel fabrication

Pollard, D., Herrmann, G., Ward, C. & Etches, J., 24 Jun 2018. 8 p.

Research output: Contribution to conferenceConference Paper

Open Access
File
70 Downloads (Pure)

A novel approach to manufacture complex lightly loaded structures using vacuum forming: technique and first trials assessment

Ward, C. & Potter, KD., 2008, SECIO 08, SAMPE Europe International Conference, Paris, France. p. 92 - 97 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Aligned Discontinuous Fiber Composites: A Short History

Such, M., Ward, C. & Potter, K., 2014, In : Journal of Multifunctional Composites. p. 113–126

Research output: Contribution to journalArticle (Academic Journal)

A comparison of FDM structural layouts and implementation of an open-source arm-based system

Pollard, D., Herrmann, G., Ward, C. & Etches, J., 30 Apr 2018, 2018 3rd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2018) – 2018 3rd International Conference on Design, Engineering and Science (ICDES 2018). EDP Sciences, Vol. 167. 6 p. 03002. (MATEC Web of Conferences).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
3 Citations (Scopus)
267 Downloads (Pure)

Achieving Low Variability, Rework and Scrap Rates In The Production Of Advanced Composite Parts

Potter, K., Hazra, K. & Ward, C., 2009, SEICO 09 SAMPE Europe International Conference, Paris.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)