Mr Carwyn Ward

B.Eng. (Hons), M.Res.(Wales), PhD

  • BS8 1TR

20082020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference Contribution (Conference Proceeding)
2020

Eliminating the need for gel-coat surfaces in composites

Sivanathan, L., Atkins, G., Ward, C. & Koutsomitopoulou, A., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Innovative preform design exploiting automated fibre placement

Zivkovic, P., Ward, C. & Marengo, G., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2019

Computational fluid dynamics methodology for characterisation of leading edge erosion in whirling arm test rigs

Herring, R., Dyer, K., MacLeod, A. & Ward, C., 21 May 2019, WindEurope Conference and Exhibition 2019: Delivering a Clean Economy for All European: Proceedings of a meeting held 2-4 April 2019, Bibao, Spain.. 1 ed. Vol. 1222. 11 p. 012011. (Journal of Physics: Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
114 Downloads (Pure)

Layup end effectors with tactile sensing capabilities

Elkington, M., Ward, C., Ward-Cherrier, B., Lepora, N., Pestell, N. & Almas, E., 26 Apr 2019, Proceedings of the 4th Symposium on Automated Composite Manufacturing. V. Hoa, S. (ed.). Concordia University Press

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Understanding of Leading-Edge Protection Performance Using Nano-Silicates for Modification

Ouachan, I., Kuball, M., Liu, D., Dyer, K., Ward, C. & Hamerton, I., 21 May 2019, WindEurope Conference and Exhibition 2019: Delivering a Clean Economy for All European: Proceedings of a meeting held 2-4 April 2019, Bibao, Spain. 1 ed. Vol. 1222. 11 p. 012016. (Journal of Physics: Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
1 Citation (Scopus)
132 Downloads (Pure)
2018

A comparison of FDM structural layouts and implementation of an open-source arm-based system

Pollard, D., Herrmann, G., Ward, C. & Etches, J., 30 Apr 2018, 2018 3rd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2018) – 2018 3rd International Conference on Design, Engineering and Science (ICDES 2018). EDP Sciences, Vol. 167. 6 p. 03002. (MATEC Web of Conferences).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
3 Citations (Scopus)
256 Downloads (Pure)
2017

Automated composite draping: a review

Elkington, M., Ward, C. & Sarkytbayev, A., 25 May 2017, SAMPE 2017. SAMPE North America, 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
429 Downloads (Pure)

Collaborative Human-Robotic layup

Elkington, M., Ward, C., Kirby, A., Libby, M. & Gandhi, N., 14 Dec 2017, Composites Advanced Manufacturing Exposition 2017. Orlando Florida, 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Filament temperature dynamics in fused deposition modelling and outlook for control

Pollard, D., Ward, C., Herrmann, G. & Etches, J., 18 Sep 2017, 27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2017, 27-30 June 2017, Modena, Italy. p. 536-544 9 p. ( Procedia manufacturing; vol. 11).

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
12 Citations (Scopus)
302 Downloads (Pure)

Improving the Performance of Tufted Composite Sandwich Structures

Hartley, J., Dyson, M. & Ward, C., 2017, 21st International Conference on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Improving the Understanding of Tufted Energy Absorbing Sandwich Structures

Hartley, J. & Ward, C., 25 Oct 2017, Proceedings of the thirty-second technical conference. American Society for Composites, p. 2260-2273 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
241 Downloads (Pure)
2016

Automated Layup of Sheet Prepregs on Complex Moulds

Elkington, M. P., Ward, C. & Potter, K. D., 24 Jun 2016, International SAMPE Technical Conference. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
9 Citations (Scopus)
318 Downloads (Pure)

Column Interaction in Tufted Sandwich Structures Under Edgewise Loading

Hartley, J. W., Tse, G., Kratz, J., Ward, C. & Partridge, I. K., 30 Jun 2016, ECCM17 - 17th European Conference on Composite Materials: Munich, German, 26-30 June 2016. European Conference on Composite Materials, ECCM, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
150 Downloads (Pure)

Cure rate tailoring of thick composites via temperature controlled vascular pathways

O'Donnell, M. P., Mahadik, Y. & Ward, C., 4 Jan 2016, 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics Inc. (AIAA), 14 p. 0161

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
353 Downloads (Pure)

Effects of automated patch placement on the mechanical performance of reformed NCF carbon fibre

Snudden, J. P., Horn, B., Ward, C., Potter, K. & Drechsler, K., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2 Citations (Scopus)

Hand lay-up of complex geometries-prediction, capture and feedback

Crowley, D. M., Elkington, M. P., Ward, C. & Potter, K. D., 26 May 2016, International SAMPE Technical Conference. Society for the Advancement of Material and Process Engineering, Vol. 2016-January. 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
232 Downloads (Pure)

Rate Dependance of Forming UD Prepreg Laminates

Elkington, M. P. & Ward, C., 24 Jul 2016, ECCM17 - 17th European Conference on Composite Materials: Munich, German, 26-30 June 2016. European Conference on Composite Materials, ECCM, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

The Manufacture of Honeycomb Cores using Fused Deposition Modelling

Pollard, D., Ward, C., Herrmann, G. & Etches, J., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
1 Citation (Scopus)
170 Downloads (Pure)

Visualising process induced variations in the manufacture of tufted sandwich panels

Withers, E. M., Kratz, J., Hamerton, I. & Ward, C., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2015

Towards the development of an instrumented test bed for tufting visualisation

Tan, G., Hartley, J. W., Withers, E., Kratz, J. & Ward, C., 17 Sep 2015, Proceedings of the SAMPE Europe Conference 2015 AMIENS. 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Open Access
File
113 Downloads (Pure)
2014

A study of the pressure distribution in the hand layup and vacuum bagging processes

Bloom, L. D., Napper, M. A., Ward, C. & Potter, K., 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Preshearing: The evolution of manual layup

Elkington, M., Ward, C., Chatzimichali, A. & Potter, K., 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Systems thinking for rapid decision making in industrial contexts

Winter, D. J. J., Ashton-Rickardt, P., Ward, C., Yearworth, M., McMahon, C. A. & Potter, K. D., 1 Jan 2014, 8th Annual IEEE International Systems Conference, SysCon 2014 - Proceedings. IEEE Computer Society, p. 206-212 7 p. 6819259

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2013

A status of acceptance criteria and process requirements in advanced composites manufacturing, and whether they are fit for purpose

Crowley, D. M., Ward, C. & Potter, K., 19 Dec 2013, SAE Technical Papers. Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

6 Citations (Scopus)

COMPRESSIBILITY OF COMPLEX 3D BRAIDED ARCHITECTURES

Mahadik, Y., Scrimshaw, C., Ward, C. & Ivanov, D., 2013, COMPOSITES WEEK @ LEUVEN AND TEXCOMP-11 CONFERENCE. 16-20 SEPTEMBER 2013, LEUVEN.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

NOVEL FLEXIBLE TOOLING TO ENHANCE LIQUID RESIN INFUSION MANUF-ACTURE FOR NET-SHAPED PREFORMS

Ward, C., Creak, A., Heath, C., White, J., Mahadik, Y. & Ivanov, D., 2013, COMPOSITES WEEK @ LEUVEN AND TEXCOMP-11 CONFERENCE. 16-20 SEPTEMBER 2013, LEUVEN.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

On prepreg properties and manufacturability

Elkington, M., Bloom, L. D., Ward, C., Chatzimichali, A. & Potter, K., 24 Jul 2013, Proc. 19th Int. Conf. on Composite Materials, Montreal, Quebec, Canada. p. 4397-4409 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

10 Citations (Scopus)

The manufacture of advanced composite parts to rigid industrial specifications - Can it be made?

Crowley, D. M., Ward, C. & Potter, K., 19 Dec 2013, SAE Technical Papers. Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2 Citations (Scopus)
2012

The compaction of uncured toughened prepreg laminates in relation to automated forming

Hall, C., Ward, C., Ivanov, D. S. & Potter, K., 1 Jan 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

4 Citations (Scopus)
2011

Exploring the manual forming of complex geometry composite panels for productivity and quality gains in relation to automated forming capabilities

Ward, C., Lukaszewicz, D. & Potter, K., 1 Dec 2011, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2010

Improving the Manufacture of Complex Geometries through the Use of a Novel Highly Drapable Preform- A Tow Steering Approach

Hazra, K., Ward, C. & Potter, K., Jun 2010, ECCM.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2009

Achieving Low Variability, Rework and Scrap Rates In The Production Of Advanced Composite Parts

Potter, K., Hazra, K. & Ward, C., 2009, SEICO 09 SAMPE Europe International Conference, Paris.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

2008

A novel approach to manufacture complex lightly loaded structures using vacuum forming: technique and first trials assessment

Ward, C. & Potter, KD., 2008, SECIO 08, SAMPE Europe International Conference, Paris, France. p. 92 - 97 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

Understanding composites design and manufacturing for minimisation of scrap generation: The first steps to efficient material use

Ward, C. & Potter, KD., 2008, SECIO 08, SAMPE Europe International Conference, Paris, France. p. 543 - 548 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)