Research output per year
Research output per year
Research output
- 1 - 50 out of 69 results
Search results
-
2020
Comparison of Surrogate Modeling Methods for Finite Element Analysis of Landing Gear Loads
Hoole, J., Sartor, P. N., Booker, J. D., Cooper, J. E., Gogouvitis, X. V. & Schmidt, R. K., 5 Jan 2020, AIAA SciTech 2020 Forum. AIAA 2020-0681Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open Access4 Citations (Scopus) -
Comparison of warm prestressed enhanced toughness in irradiated and non-irradiated ferritic steel
Van Gelderen, D. & Booker, J. D., 2020, Proc. 7th International Conference on Integrity, Reliability, Failure.. p. 313-316 4 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Development of a Power Generation System and Quadruplex Direct Electric Drive for a Helicopter Tail Rotor
Booker, J. D., Yon, J. M., Williamson, S., North, D. J. & Mellor, P., 2020, Proceedings AIAA SciTech Forum 2020.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Strengthening and Weakening Mechanisms in Interference-fitted Joints.
Booker, J. D. & Truman, C. E., 14 May 2020, Proc. 7th International Conference on Integrity, Reliability, Failure. . p. 405-418 14 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
2019
A Framework to Implement Probabilistic Fatigue Design of Safe-Life Components
Hoole, J., Sartor, P., Booker, J., Cooper, J., Gogouvitis, X. V., Ghouali, A. & Schmidt, R. K., 3 Jul 2019, ICAF 2019 - Structural Integrity in the Age of Additive Manufacturing: Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland. Niepokolczycki, A. & Komorowski, J. (eds.). Springer International Publishing AG, p. 321-335 15 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile2 Citations (Scopus)212 Downloads (Pure) -
A Study of Technical, Economic and Social Factors Affecting Micro-Hydropower Plants in Nepal
Butchers, J., Williamson, S., Tran, A., Booker, J., Gautam, B. & Bikram Karki, P., Feb 2019, 2018 IEEE Global Humanitarian Technology Conference (GHTC 2018): Proceedings of a meeting held 18-21 October 2018, San Jose, California, USA. Institute of Electrical and Electronics Engineers (IEEE), p. 446-453 8 p. 8601895Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile5 Citations (Scopus)430 Downloads (Pure) -
Optimising the performance of interference-fitted work rolls
Booker, J. & McMillan, M., 2019, Proceedings SEMC 2019: The Seventh International Conference on Structural Engineering, Mechanics and Computation, 2 - 4 September 2019, Cape Town, South Africa..Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Probability Distribution Type for the Accumulated Damage from Miner's Rule in Fatigue Design
Hoole, J., Sartor, P., Booker, J., Cooper, J., Gogouvitis, X. V. & Schmidt, R. K., 28 Jun 2019, Mechanical Fatigue of Metals: Experimental and Simulation Perspectives. Correia, J. A. F. O., Jesus, A. M. P. D., Fernandes, A. A. & Calçada, R. (eds.). 1 ed. Springer International Publishing AG, Vol. 7. p. 205-212 8 p. (Structural Integrity).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile280 Downloads (Pure) -
Stochastic modelling of the cold forming process
Booker, J. & Woodhead, J., 2019, Proceedings SEMC 2019: The Seventh International Conference on Structural Engineering, Mechanics and Computation, 2 - 4 September 2019, Cape Town, South Africa..Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
2018
Management of Complex Loading Histories for use in Probabilistic Creep-Fatigue Damage Assessments
Zentuti, N., Booker, J., Bradford, R. & Truman, C., 26 Apr 2018, ASME 2018 Pressure Vessels & Piping Conference: Proceedings of the 2018 PVP Conference, Prague, Czech Republic. American Society of Mechanical Engineers (ASME), 10 p. PVP2018-84400Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
7 Downloads (Pure) -
2017
Advances in Helicopter Electric Tail Rotor Drive
Stickels, K., Brunetti, M. B., Barber, M., Brinson, P., Roe, T., Booker, J., Mellor, P., Williamson, S. & Yon, J., 12 Sept 2017, Proceedings of the European Rotorcraft Forum. 662Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Developing Probabilistic Methodologies in the Creep Regime
Zentuti, N., Booker, J., Truman, C. & Bradford, R., 15 May 2017, Proc. International Conference on Life/Crack Assessment & Failures in Industrial Structures (HIDA 17). S3b-4Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Electromagnetic and Thermal Coupling within a Fault Tolerant Aircraft Propulsion Motor
Mellor, P., Yon, J., Baker, J., North, D. & Booker, J., 21 May 2017, Proc. Proc. IEEE International Electrical Machines & Drives Conference (IEMDC 17).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Investigation of equivalent stator-winding thermal resistance during insulation system ageing
Williamson, S., Wrobel, R., Yon, J., Booker, J. & Mellor, P., Oct 2017, 11th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED 2017): Proceedings of a meeting held 29 August - 1 September 2017, Tinos, Greece. Institute of Electrical and Electronics Engineers (IEEE), p. 550-556 7 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile13 Citations (Scopus)733 Downloads (Pure) -
Measurement of the Thermal Characteristics of a Stator-Housing Interface
Simpson, N., Duggan, T., Mellor, P. & Booker, J., 29 Aug 2017, Proc. 11th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED 2017).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Scaled Four Point Bend Specimens and the Transferability of their Results
Orrock, P., Booker, J. & Truman, C., 18 Jun 2017, Proc. 14th International Conference on Fracture (ICF).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
2016
Characterising the Performance of Selected Electrical Machine Insulation Systems
Wrobel, R., Williamson, S. J., Booker, J. D. & Mellor, P., Jan 2016, 2015 IEEE Energy Conversion Congress and Exposition (ECCE 2015): Proceedings of a meeting held 20-24 September 2015, Montreal, Quebec, Canada. Institute of Electrical and Electronics Engineers (IEEE), p. 4857-4864 8 p. (IEEE Energy Conversion Congress and Exposition (ECCE)).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile20 Citations (Scopus)852 Downloads (Pure) -
Multi-Physics Experimental Investigation into Stator-Housing Contact Interface
Simpson, N., Wrobel, R., Booker, J. & Mellor, P., 16 Apr 2016, 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). Institution of Engineering and Technology (IET), 6 p. cp684Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile8 Citations (Scopus)1314 Downloads (Pure) -
2015
Electrical machine technologies for an electric tail rotor drive
Mellor, P., Yon, J., Williamson, S., Farman, J., Booker, J., Barber, M., Stickels, K. & Brisnon, P., 2015, Proceedings European Rotorcraft Forum 2015. ERF2015_0150Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
10 Citations (Scopus) -
Modelling of Dynamic Friction in the Cold Forming of Plain Spherical Bearings
Woodhead, J., Truman, C. E. & Booker, J. D., 2015, WIT Transactions on Engineering Sciences: Surface Effects and Contact Mechanics including Tribology XII. WIT Press, Vol. 91. 12 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile473 Downloads (Pure) -
Parametric optimization of a flexure-based active Gurney flap mechanism for minimum stress
Freire Gomez, J., Booker, J. & Mellor, P., 2015, Proc. 41st European Rotorcraft Forum, 1-4 September, Munich, Germany. ERF2015_119Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
STATISTICAL ANALYSIS AND MONTE CARLO SIMULATIONS OF WARM PRE-STRESSING OF IRRADIATED SMALL SINGLE EDGE NOTCH BEND SPECIMENS
Van Gelderen, D., Dana Lauerova, D., Booker, J. & Smith, D., 2015, Transactions, SMiRT-23, Manchester, United Kingdom - August 10-14. 13 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Stress optimization of leaf-spring crossed flexure pivots for an active Gurney flap mechanism
Freire Gomez, J., Booker, J. D. & Mellor, P., 27 Mar 2015, Proceedings SPIE 9433: Industrial and Commercial Applications of Smart Structures Technologies 2015. Society of Photo-Optical Instrumentation Engineers (SPIE), Vol. 9433. 16 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile1 Citation (Scopus)620 Downloads (Pure) -
Winding Design for Minimum Power Loss and Low-Cost Manufacture in Application to Fixed-Speed PM Generator
Wrobel, R., Staton, D., Lock, R. J., Booker, J. D. & Drury, D., Jan 2015, 2014 IEEE Energy Conversion Congress and Exposition (ECCE 2014): Proceedings of a meeting held 14-18 September 2014, Pittsburgh, Pennsylvania, USA. Institute of Electrical and Electronics Engineers (IEEE), p. 1806-1813 8 p. (IEEE Energy Conversion Congress and Exposition (ECCE)).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
Open AccessFile9 Citations (Scopus)317 Downloads (Pure) -
2014
Control of parallel single-phase inverters in a low-head pico-hydro off-grid network
Williamson, S. J., Griffo, A., Stark, B. H. & Booker, J. D., Mar 2014, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society: Proceedings of a meeting held 10-13 November 2013, Vienna, Austria. Institute of Electrical and Electronics Engineers (IEEE), p. 1571-1576 6 p. 6699367. (Proceedings of the IEEE Industrial Electronics Society (IECON)).Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
4 Citations (Scopus) -
Impact of Geometric Variation on The Performance of Cold Formed Bearings
Woodhead, J., Booker, J. D. & Truman, C. E., 2014, International Symposium on Robust Design (ISoRD14), Copenhagen, Demark, 13-14 August 2014. DTU, Lyngby, Denmark, Vol. 1. 10 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Site Implementation of a Low-Head Pico-Hydro Turgo Turbine
Williamson, S. J., Stark, B. H. & Booker, J. D., 2014, World Renewable Energy Congress XIII, London, 3-8 August.. 10 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
2013
Validation of the Forming Stresses in Spherical Bearings using Neutron Diffraction. Proc. MECA SENS 7th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation, 10-12 September, Sydney, Australia.
Woodhead, J., Booker, J. D. & Truman, C. E., 2013, MECASENS.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
2012
Modelling of Nosing for the Assembly of Aerospace Bearings
Woodhead, J. & Booker, J., 2012, SEM XII International Congress & Exposition on Experimental & Applied Mechanics, June 11-14 2012, Costa Mesa, CA.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
10 Citations (Scopus) -
Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
Mcmillan, M., Booker, J. & Smith, D., 2012, SEM XII International Congress & Exposition on Experimental & Applied Mechanics, June 11-14 2012, Costa Mesa, CA.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
2 Citations (Scopus) -
The Combined Effects of Residual Stress and Warm Prestressing on Cleavage Fracture in Steels
Rosahl, K., Booker, J. & Smith, D., Jul 2012, ASME PVP Conference, Toronto, Canada, July 15-19, 2012. 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
1 Citation (Scopus) -
2011
A Monte Carlo Simulation of the Effects of Warm Prestressing
Rosahl, K., Booker, J. & Smith, D., 2011, ESIA International Conferences on Engineering Structural Integrity Assessment, Manchester, 24-25 May 2011.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Low Head Pico Hydro Turbine Selection using a Multi-Criteria Analysis
Williamson, S., Stark, B. & Booker, J., 2011, World Renewable Energy Congress 2011, 8-11 May 2011, Linköping, Sweden. no. HP0304. 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Rope-pump System Modelling using Renewable Power Combinations
Williams, C., Beattie, A., Parker, T., Read, J. & Booker, J., 2011, World Renewable Energy Congress 2011, 8-11 May 2011, Linköping, Swedenno. no. PV0073.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Validation of Micro-slip in Interference Fitted Shafts Subject to Complex Loading Regimes
Mcmillan, M., Booker, J. & Smith, D., 2011, International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV), 7-9 September 2011, Edinburgh.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
2 Citations (Scopus) -
2010
A mechanical battery for powering wireless sensor nodes in harsh environments
Constantinou, P., Aird, C., Mellor, P., Smith, D., Booker, J., Flewitt, P. & Truman, C., Mar 2010, SPIE smart Structures and NDE, San Diego, 7-11 March. Society of Photo-Optical Instrumentation Engineers (SPIE), Vol. 7645.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
A Semi-Permeable Containment Sleeve for High-Speed PM Machines
Yon, J., Mellor, P., Wrobel, R., Booker, J. & Burrow, S., Apr 2010, Proc. 5th International Conference on Power Electronics, Machines and Drives (PEMD), 19-21 April, Brighton, UK.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
2 Citations (Scopus) -
Calibrating Weibull parameters to predict fracture in laboratory specimens of different shapes
Rosahl, K., Booker, J. & Smith, D., 2010, 18th European Conference on Fracture, Dresden, Germany, 30 August - 3 September, B.04.11-2.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
2008
Classification and Selection of Actuator Technologies with Consideration of Stimuli Generation
Poole, A. & Booker, J., 2008, SPIE Smart Structures and NDE 2008, San Diego, USA, 9-13 March 2008.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
5 Citations (Scopus) -
Contra-Rotating Modular Wound Permanent Magnet Generator for a Wind Turbine
Wrobel, R., Drury, D., Mellor, P. & Booker, J., 2 Apr 2008, The 4th International Conference on Power Electronics, Machines and Drives 2008, 2-4 April 2008, York. Institution of Engineering and Technology (IET), p. 330 - 334 5 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
4 Citations (Scopus) -
Experiences in the Development and Industrial Implementation of Design Methods
Booker, J., Sept 2008, EDIProD’2008, Jurata, Poland.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
2007
A DFX tool for fatigue prediction
Darlington, J. & Booker, J., Aug 2007, International Conference on Engineering Design (ICED07), Paris.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Improving confidence in simulation-based design through error functions
Goh, Y., McMahon, C. & Booker, J., Sept 2007, ASME IDETC/CIE, Las Vegas.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Influence of residual stress in measurement of apparent fracture toughness
Lewis, S., Smith, D., Booker, J. & Truman, C., 15 Oct 2007, 9th International Conference on Engineering Structural Integrity Assessment (EISA), Beijing, China.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
Strategies to Enhance Design Analysis Reuse: a case study in uncertainty
Goh, Y., McMahon, C. & Booker, J., Aug 2007, International Conference on Engineering Design (ICED07), Paris.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
1 Citation (Scopus) -
2006
Accurate 3D finite element modelling of a molar for durability analysis
Alemzadeh, K., Wang, L. & Booker, J., Mar 2006, 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering - Antibes, France. p. 391 - 396Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
A framework for capturing design analysis knowledge for resuse using process models
Goh, Y., McMahon, C. & Booker, J., May 2006, International Design Conference - Design 2006, Dubrovnik.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
-
A framework for capturing design analysis knowledge for reuse using design process models
Goh, Y. M., McMahon, C. A. & Booker, J. D., 1 Dec 2006, 9th International Design Conference, DESIGN 2006. p. 1517-1524 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
2 Citations (Scopus) -
Implementation issues and benefits of integrating microcontrollers in an existing design and build project
Booker, J., Wishart, C. & Alemzadeh, K., Sept 2006, Engineering and Product Design Education Conference 2006 (E&PDE06) Conference, University of Salzburg.Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
1 Citation (Scopus) -
Torque dense, external rotor hub-drive for a hybrid solar vehicle
Wrobel, R., McNeill, J., Staton, D., Booker, J. & Mellor, P., Sept 2006, Vehicle Power and Propulsion Conference, Windsor, 6-8 September. Institute of Electrical and Electronics Engineers (IEEE)Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)