Dr Kazem Alemzadeh

Search results

• 2025

  Experimental Study of Two-bite Test Parameters for Effective Drug Release from Chewing Gum using a Novel Bio-engineered Testbed

  Alemzadeh, K. & Alemzadeh, J., 9 Jun 2025, (Submitted) In: Biomedicines. 23 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Functions of the Mouth, Jaws and Teeth 100%

• Innovative Bionics Product Life-Cycle Management Methodology Framework with Built-In Reverse Biomimetics: From Inception to Clinical Validation

  Alemzadeh, K., 3 Mar 2025, In: Biomimetics. 10, 3, 43 p., 158.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  Open Access

  • Cycle Management 100%
  • Biomimetics 100%
  • Bionics 100%
  • Product Life Cycle 100%
  • Prosthetics 100%
• 2021

  Development of a Chewing Robot with Built-in Humanoid Jaws to Simulate Mastication to Quantify Robotic Agents Release from Chewing Gums Compared to Human Participants

  Alemzadeh, K., Jones, S., Davies, M. & West, N., 1 Feb 2021, In: IEEE Transactions on Biomedical Engineering. 68, 2, p. 492 - 504 13 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  Open Access

  File

  • Masticatory Force 100%
  • Jaw 100%
  • Xylitol 37%
  • In Vitro 12%
  • Saliva Substitute 12%
  20 Citations (Scopus)

  960 Downloads (Pure)
• 2019

  Prototyping and Evaluating a Novel Humanoid Chewing Robot for Drug Delivery using a Medicated Chewing Gum

  Alemzadeh, K., Jones, S. B. & West, N., 24 Jun 2019.

  Research output: Contribution to conference › Conference Paper › peer-review

  • Pharmaceutical Market 100%
  • Drug Release 50%
  • Xylitol 50%

• Prototyping and Evaluating a Novel Humanoid Chewing Robot for Drug Delivery using a Medicated Chewing Gum

  Alemzadeh, K., 5 Dec 2019, (In preparation).

  Research output: Contribution to conference › Conference Paper › peer-review

  • Pharmaceutical Market 100%
  • Masticatory Force 100%
  • Drug Release 50%
  • Clinical Trials Unit 50%
  • Xylitol 50%
• 2017

  Through-life engineering services of wind turbines

  Igba, J., Alemzadeh, K., Durugbo, C. & Eiriksson, E. T., May 2017, In: CIRP Journal of Manufacturing Science and Technology. 17, p. 60-70 11 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  Open Access

  File

  • Engineering 100%
  • Compressed Air Motors 100%
  • Condition Monitoring 100%
  • Gearbox 33%
  • Power Generation 16%
  13 Citations (Scopus)

  530 Downloads (Pure)
• 2016

  Analysing RMS and peak values of vibration signals for condition monitoring of wind turbine gearboxes

  Igba, J. E., Alemzadeh, K. & Durugbo, C., 1 Jun 2016, In: Renewable Energy. 91, p. 90-106 17 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  Open Access

  File

  • Gearbox 100%
  • Compressed Air Motors 100%
  • Peak Value 100%
  • Condition Monitoring 100%
  • Transmission (Machine Elements) 100%
  157 Citations (Scopus)

  632 Downloads (Pure)

• Through-life engineering services of wind turbines

  Igba, J., Alemzadeh, K., Durugbo, C. & Eiriksson, E. T., 7 Jun 2016, (Submitted) In: CIRP Journal of Manufacturing Science and Technology. 17, p. 60-70 11 p.

  Research output: Contribution to journal › Special issue (Academic Journal) › peer-review

  • Engineering 100%
  • Compressed Air Motors 100%
  • Condition Monitoring 100%
  • Gearbox 33%
  • Power Generation 16%
• 2015

  A framework for optimising product performance through feedback and reuse of in-service experience

  Igba, J., Alemzadeh, K., Gibbons, P. M. & Henningsen, K., Dec 2015, In: Robotics and Computer-Integrated Manufacturing. 36, p. 2-12 11 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  Open Access

  File

  • Service Experience 100%
  • Product Performance 100%
  • Feedback 100%
  • Case Study 100%
  • Life Cycle 100%
  42 Citations (Scopus)

  455 Downloads (Pure)

• Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes

  Igba, J., Alemzadeh, K., Henningsen, K. & Durugbo, C., Nov 2015, In: Wind Energy. 18, 11, p. 2013-2024 12 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  Open Access

  File

  • Gearbox 100%
  • Compressed Air Motors 100%
  • Preventive Maintenance 100%
  • Failure Data 66%
  • Maintenance Task 33%
  37 Citations (Scopus)

  687 Downloads (Pure)

• In-service decision modelling for equipment maintenance: a data-driven approach

  Igba, J., Durugbo, C., Alemzadeh, K. & Eiriksson, E., 21 Oct 2015, (Submitted) In: Production and Operations Management. 25 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Compressed Air Motors 100%
  • Energy Engineering 40%
  • Gearbox 40%
  • Industrial Equipment 40%
  • Rotors 20%

• Performance assessment of wind turbine gearboxes using in-service data: Current approaches and future trends

  Igba, J., Alemzadeh, K., Durugbo, C. & Henningsen, K., 1 Oct 2015, In: Renewable and Sustainable Energy Reviews. 50, p. 144-159 16 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Future Trend 100%
  • Gearbox 100%
  • Compressed Air Motors 100%
  • Maintainability 42%
  • Field Performance 28%
  85 Citations (Scopus)

• Through-life engineering services of wind turbines

  Igba, J., Alemzadeh, K., Durugbo, C. & Henningsen, K., 30 Sept 2015, (Submitted) In: Procedia CIRP. 10 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Engineering 100%
  • Compressed Air Motors 100%
  • Power Generation 16%
  • Application Requirement 16%
  • Gearbox 16%
• 2014

  Biomimetic modeling of human skull for dental applications using 3D Geometric Morphometric method and reverse engineering

  Alemzadeh, K., 2014. 11 p.

  Research output: Contribution to conference › Conference Paper › peer-review

  • Biomimetics 100%
  • Reverse Engineering 100%
  • Morphometrics 100%
  • Solid Modeling 100%
  • Surface (Surface Science) 100%

• Knowledge management: A cross sectorial comparison of wind generation and naval engineering

  Ford, G., Igba, J., McMahon, C., Alemzadeh, K., Rowley, C. & Henningsen, K., 1 Jan 2014, In: IFIP Advances in Information and Communication Technology. 442, p. 129-138 10 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Engineering 100%
  • Lifecycle 100%
  • Knowledge Management 100%
  • Navy 100%
  • Offshore Wind 100%
  2 Citations (Scopus)

• Review of Current Available Dental Articular Simulators

  Wang, L., Alemzadeh, K. & Hu, H., 2014, p. 623-632. 10 p.

  Research output: Contribution to conference › Conference Paper › peer-review

  • Lower Jaw 100%

• Through-life engineering services: A wind turbine perspective

  Igba, J., Alemzadeh, K., Durugbo, C. & Henningsen, K., 4 Nov 2014, Procedia CIRP. 1 ed. Elsevier Science, Vol. 22. p. 213-218 6 p. (Procedia CIRP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  • Engineering 100%
  • Compressed Air Motors 100%
  • Power Generation 16%
  • Application Requirement 16%
  • Gearbox 16%
  17 Citations (Scopus)
• 2013

  A framework for optimising product performance through using field experience of in-service products to improve the design and manufacture stages of the product lifecycle

  Igba, J. E., Alemzadeh, K., Gibbons, P. M. & Friis, J., 26 Jun 2013. 8 p.

  Research output: Contribution to conference › Conference Paper › peer-review

  • Subsystems 100%
  • Design Stage 100%
  • Product Performance 100%
  • Manufacture Stage 100%
  • Product Lifecycle 100%

• A Systems Approach towards Reliability-Centred Maintenance (RCM) of Wind Turbines

  Igba, J., Alemzadeh, K., Anyanwu-Ebo, I. & Gibbons, P. M., 19 Mar 2013, Elsevier: Procedia Computer Science. 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  • Gearbox 100%
  • Compressed Air Motors 100%
  • Centered Maintenance 100%
  • Proactive Approach 100%
  • Major Component 100%

• A systems a Reliability-Centred Maintenance (RCM) of wind turbines

  Igba, J., Alemzadeh, K., Anyanwu-Ebo, I., Gibbons, P. & Friis, J., 2013, Procedia Computer Science. Vol. 16. p. 814-823 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  • Compressed Air Motors 100%
  • Centered Maintenance 100%
  • System Thinking Approach 100%
  • Proactive Approach 100%
  • Major Component 100%
  63 Citations (Scopus)
• 2012

  Combining Systems Thinking and PAS 55: Developing a Value Improvement Model for Asset Management (a-VIM) with a Wind Turbine Case Study

  Igba, J. E., Gibbons, P. M. & Alemzadeh, K., 27 Nov 2012, p. 1-6. 6 p.

  Research output: Contribution to conference › Conference Poster

  • Asset Management 100%
  • Case Study 100%
  • Value Analysis 100%
  • Quality Management 25%
  • Conceptual Framework 16%

• Improved single- and multi-contact life-time testing of dental restorative materials using key characteristics of the human masticatory system and a force/position-controlled robotic dental wear simulator

  Raabe, D., Harrison, A., Ireland, A., Alemzadeh, K., Sandy, J., Dogramadzi, S., Melhuish, C. & Burgess, S., Jan 2012, In: Bioinspiration and Biomimetics. 7, 1, p. 1 - 17 17 p., 016002.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Restorative Material 100%
  • Sliding Motion 100%
  • Testing Time 100%
  • In Vitro 100%
  • Lifespan 100%
  19 Citations (Scopus)
• 2011

  Capturing motions and forces of the human masticatory system to replicate chewing and to perform dental wear experiments

  Raabe, D., Harrison, A., Ireland, A., Alemzadeh, K. & Sandy, J., 27 Jun 2011, Proceedings of the 24th International Symposium on Computer-Based Medical Systems (CBMS 2011). Olive, M. & Solomonides, T. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 1 - 6 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  • In Vitro 100%
  • Masticatory Force 100%
  • Lifespan 50%
  • Six Degrees of Freedom 50%
  • Dental Restorative Material 50%
  11 Citations (Scopus)

• Capturing motions and forces of the human masticatory system to replicate chewing and to perform dental wear experiments

  Raabe, D., Harrison, A., Alemzadeh, K., Ireland, A. & Sandy, J., 30 Aug 2011, p. 1 - 6. 6 p.

  Research output: Contribution to conference › Conference Paper › peer-review

  • In Vitro 100%
  • Masticatory Force 100%
  • Lifespan 50%
  • Six Degrees of Freedom 50%
  • Dental Restorative Material 50%
  11 Citations (Scopus)
• 2009

  A new dental wear simulator for single and multi-contact testing of dental restorative materials

  Raabe, D., Alemzadeh, K., Harrison, A. & Ireland, A., 2009, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

• Capturing motions and forces of the human masticatory system

  Raabe, D., Alemzadeh, K., Sandy, J., Harrison, A. & Ireland, A., 2009, In: Journal of Dental Research.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

• The chewing robot: a new biologically-inspired way to evaluate dental restorative materials

  Raabe, D., Alemzadeh, K., Harrison, A. & Ireland, A., Sept 2009, 2009 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
  32 Citations (Scopus)
• 2008

  3D surface imaging in dentistry - what are we looking at?

  Ireland, A., McNamara, C., Clover, M., Wenger, N., House, K., Barbour, M., Sandy, J., Alemzadeh, K. & Zhang, L., Oct 2008, In: British Dental Journal. 205, p. 387 - 392 6 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Dentistry 100%
  • 3D Imaging 100%
  • Limitations 100%
  • Surface Imaging 100%
  • Surface (Surface Science) 100%
  49 Citations (Scopus)

• Prototyping Artificial Jaws for the Robotic Dental Testing Simulator

  Alemzadeh, K. & Raabe, D., Nov 2008, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 222 No H8, p. 1209 - 1220 12 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Jaw 100%
  • Maxilla 14%
  • Lower Jaw 14%
  • Masticatory Force 14%
  • Articulator 14%
  8 Citations (Scopus)
• 2007

  A 3-dimensional vision system for dental applications

  Zhang, L. & Alemzadeh, K., 23 Aug 2007, 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society - Lyon, France. p. 3369 - 3372

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  8 Citations (Scopus)

• A general solution to the material performance index for bending strength design (vol 27, pg 1046, 2006)

  Pasini, D., Burgess, S. C., Smith, D. J. & Alemzadeh, K., 2007, In: Materials and Design. 28, 7, p. 2265-2265 1 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

• An active vision system for modelling biomaterials

  Alemzadeh, K., Zhang, L. & Conn, A., Mar 2007, In: International Journal of Design and Nature. 1 (2), p. 100 - 115 16 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Computer-Aided Manufacture 100%
  • Computervision 50%
  • Engineering 50%
  • Objective Evaluation 50%
  • Stereovision 50%

• Prototyping a robotic dental testing simulator

  Alemzadeh, K., Hyde, R. & Gao, J., Jun 2007, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 221 (4), p. 385 - 396 12 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Stewart Platform 100%
  • Prototype 100%
  • Computer Aided Design 40%
  • Degree of Freedom 20%
  • Pulse Width Modulation 20%
  19 Citations (Scopus)

• Prototyping artificial jaws for the Bristol Dento-Munch Robo-Simulator; `A parallel robot to test dental components and materials

  Alemzadeh, K. & Raabe, D., 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS 2007). Institute of Electrical and Electronics Engineers (IEEE), p. 1453-1456 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  • Jaw 100%
  • Masticatory Force 50%
  • Maxilla 16%
  • Lower Jaw 16%
  • Bite 16%
  41 Citations (Scopus)

• The integrated application of microcontrollers in a team-based design and make project

  Alemzadeh, K., Wishart, C. & Booker, J., 2007, In: The International Journal of Mechanical Engineering Education. 35(3), p. 226 - 247

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  3 Citations (Scopus)
• 2006

  Accurate 3D finite element modelling of a molar for durability analysis

  Alemzadeh, K., Wang, L. & Booker, J., Mar 2006, 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering - Antibes, France. p. 391 - 396

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

• Accurate 3-D modelling of a molar using advanced design techniques

  Alemzadeh, K. & Wang, L., 22 Mar 2006, 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2006), Antibes. p. 246 - 251

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

• A dental vision system for accurate 3D tooth modelling

  Zhang, L. & Alemzadeh, K., Aug 2006, 28th Annual International IEEE Engineering in Medicine & Biology Society (EMBS), 30 August-3 September, New York, USA. p. 4799 - 4802 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  4 Citations (Scopus)

• A general solution to the material performance index for bending strength design

  Burgess, S., Pasini, D., Smith, D. & Alemzadeh, K., Oct 2006, In: Materials and Design. 27 (10), p. 1046 - 1054 9 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Material Performance 100%
  • Bending Strength 100%
  • Performance Map 66%
  • Design Strength 33%
  7 Citations (Scopus)

• An automatic dental vision system for three-dimensional tooth modelling

  Alemzadeh, K. & Zhang, L., 22 Mar 2006, 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2006), Antibes. p. 361 - 366

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

• A team-based CAM project utilising the latest CAD/CAM and Web-based technologies in the concurrent engineering environment

  Alemzadeh, K., Jan 2006, In: International Journal of Mechanical Engineering Education. 34(1), p. 48 - 70 22 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Computer-Aided Manufacture 100%
  • Concurrent Engineering 100%
  • Computer Aided Design 100%
  • Machine Tool 22%
  • Computer Numerical Control 22%
  6 Citations (Scopus)

• A vision system for integration dental imaging to computer-aided design/manufacture

  Alemzadeh, K. & Zhang, L., 22 Mar 2006, 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2006), Antibes. p. 367 - 372

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

• Implementation issues and benefits of integrating microcontrollers in an existing design and build project

  Booker, J., Wishart, C. & Alemzadeh, K., Sept 2006, Engineering and Product Design Education Conference 2006 (E&PDE06) Conference, University of Salzburg.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  1 Citation (Scopus)

• Prototyping a dental mastication robot simulator

  Alemzadeh, K., 2006, Proceedings of the 5th World Congress of Biomechanics, Munich, 29 July-4 August. p. 241 - 245

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)
• 2005

  An investigation into engineering graduates' understanding of probability theory

  Burgess, S., Booker, J., Barr, G. & Alemzadeh, K., 2005, In: International Journal of Engineering Education. 21(3), p. 512 - 524

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  2 Citations (Scopus)

• A team based CAD project utilising the latest CAD technique and web-based technologies

  Alemzadeh, K. & Burgess, S., Oct 2005, In: International Journal of Mechanical Engineering Education (IJMEE). 33(4), p. 294 - 318 16 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review

  • Web-Based Technology 100%
  • Computer Aided Design 100%
  • Customisation 25%
  • Geometric Modeling 12%
  • Mechanism Design 12%
  8 Citations (Scopus)

• A vision based reserve engineering approach to surface digitizing in restorative dentistry

  Alemzadeh, K. & Zhang, L., Jul 2005, 9th Annual Conference Medical Image Understanding and Analysis 2005, University of Bristol. M., U., Bologna, U. O., I., C.A., B., Wessex Institute of Technology, U., G., P., Istituto per le Applicazioni del Calcolo -, C., I., E., M., Bologna, U. O. & I. (eds.). Vol. 8. p. 211 - 214 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  Open Access
• 2004

  Improved visualisation of the design space using nested performance charts

  Burgess, S., Pasini, D. & Alemzadeh, K., Jan 2004, In: Design Studies. 25 (1), p. 51 - 62 12 p.

  Research output: Contribution to journal › Article (Academic Journal) › peer-review
  9 Citations (Scopus)

• The development of a miniature mechanism for producing insect wing motion

  Burgess, S., Alemzadeh, K. & Zhang, L., 2004, Second International Conference on Design & Nature, Rhodes, Greece. p. P238 - P244

  Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

  Open Access