Skip to content

Professor Stephen R HallettB.Sc.(Cape Town), D.Phil.(Oxon.)

Professor in Composite Structures

1 - 10 out of 270Page size: 10
  1. 2020
  2. Accepted/In press

    Influence of component design on features and properties in thermoplastic overmoulded composites

    Valverde, M. A., Kupfer, R., Wollmann, T., Kawashita, L. F., Gude, M. & Hallett, S. R., 7 Feb 2020, (Accepted/In press) In : Composites Part B: Engineering.

    Research output: Contribution to journalArticle

  3. Published

    A rapid multi-scale design tool for the prediction of wrinkle defect formation in composite components

    Belnoue, J. P-H. & Hallett, S. R., 1 Feb 2020, In : Materials and Design. 187, 13 p., 108388.

    Research output: Contribution to journalArticle

  4. Published

    Composites fatigue delamination prediction using double load envelopes and twin cohesive models

    Zhang, B., Kawashita, L. F. & Hallett, S. R., 1 Feb 2020, In : Composites Part A: Applied Science and Manufacturing. 129, 14 p., 105711.

    Research output: Contribution to journalArticle

  5. 2019
  6. Published

    Experimental study of Z-pin fatigue: understanding of mode I and II coupon behaviour

    Warzok, F., Allegri, G., Gude, M. & Hallett, S. R., 1 Dec 2019, In : Composites Part A: Applied Science and Manufacturing. 127, 15 p., 105615.

    Research output: Contribution to journalArticle

  7. E-pub ahead of print

    Simplified analytical approximations for scaled composite laminates under transverse loading

    Sun, X. C., Hallett, S. R., Suemasu, H. & Wisnom, M. R., 30 Nov 2019, In : Composite Structures. 236, 111745.

    Research output: Contribution to journalArticle

  8. Published

    Predicting consolidation-induced wrinkles and their effects on composites structural performance

    Varkonyi, B., Belnoue, J. P-H., Kratz, J. & Hallett, S. R., 16 Nov 2019, In : International Journal of Material Forming. 15 p.

    Research output: Contribution to journalArticle

  9. Published

    Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading

    Cui, H., Mahadik, Y., Hallett, S. R., Partridge, I. K., Allegri, G., Ponnusamic, S. A. & Petrinic, N., 1 Oct 2019, In : Composites Part A: Applied Science and Manufacturing. 125, 12 p., 105565.

    Research output: Contribution to journalArticle

  10. Published

    Experimental investigation of high velocity oblique impact and residual tensile strength of carbon/epoxy laminates

    Kristnama, A., Xu, X., Nowell, D., Wisnom, M. & Hallett, S., 29 Sep 2019, In : Composites Science and Technology. 182, 9 p., 107772.

    Research output: Contribution to journalArticle

  11. Accepted/In press

    Mitigating forming defects by local modification of dry preforms

    Turk, M. A., Vermes, B., Thompson, A. J., Belnoue, J. P-H., Hallett, S. R. & Ivanov, D., 21 Sep 2019, (Accepted/In press) In : Composites Part A: Applied Science and Manufacturing. 128, 12 p., 105643.

    Research output: Contribution to journalArticle

  12. Published

    Numerical modelling of the effects of temperature and moisture on mechanical response

    Ammasai Sengodan, G., Allegri, G. & Hallett, S. R., 18 Sep 2019, p. 97. 1 p.

    Research output: Contribution to conferenceAbstract

Previous 1 2 3 4 5 6 7 8 ...27 Next