A COMPARISON OF STRUCTURED LIGHT SCANNING AND PHOTOGRAMMETRY FOR THE DIGITISATION OF PHYSICAL PROTOTYPES

Mark A Goudswaard; Owen C Freeman Gebler; Ben J Hicks; Jason M Yon; David Edward Jones; Chris M Snider; Aydin Nassehi

doi:10.1017/pds.2021.2

A COMPARISON OF STRUCTURED LIGHT SCANNING AND PHOTOGRAMMETRY FOR THE DIGITISATION OF PHYSICAL PROTOTYPES

Mark A Goudswaard, Owen C Freeman Gebler, Ben J Hicks, Jason M Yon, David Edward Jones, Chris M Snider, Aydin Nassehi

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

2 Citations (Scopus)

Original language	English
Title of host publication	Proceedings of the Design Society
Pages	11-20
Number of pages	10
Volume	1
DOIs	https://doi.org/10.1017/pds.2021.2
Publication status	Published - 27 Jul 2021

Publication series

Name	Proceedings of the Design Society

Name
ISSN (Electronic)	2732-527X

Bibliographical note

Funding Information:
The work reported in this paper was undertaken as part of ?Improving the product development process through integrated revision control and twinning of digital-physical models during prototyping? at the University of Bristol. The project is funded by the Engineering and Physical Sciences Research Council (EPSRC) Grant EP/R032696/1.

Funding Information:
The work reported in this paper was undertaken as part of “Improving the product development process through integrated revision control and twinning of digital-physical models during prototyping” at the University of Bristol. The project is funded by the Engineering and Physical Sciences Research Council (EPSRC) Grant EP/R032696/1.

Publisher Copyright:
© ICED 2021.All right reserved.

Access to Document

10.1017/pds.2021.2Licence: CC BY-NC-ND

Handle.net

Persistent link

Cite this

@inproceedings{616bedb967994e70a56e92d3e565c5c4,

title = "A COMPARISON OF STRUCTURED LIGHT SCANNING AND PHOTOGRAMMETRY FOR THE DIGITISATION OF PHYSICAL PROTOTYPES",

author = "Goudswaard, {Mark A} and {Freeman Gebler}, {Owen C} and Hicks, {Ben J} and Yon, {Jason M} and Jones, {David Edward} and Snider, {Chris M} and Aydin Nassehi",

note = "Funding Information: The work reported in this paper was undertaken as part of ?Improving the product development process through integrated revision control and twinning of digital-physical models during prototyping? at the University of Bristol. The project is funded by the Engineering and Physical Sciences Research Council (EPSRC) Grant EP/R032696/1. Funding Information: The work reported in this paper was undertaken as part of “Improving the product development process through integrated revision control and twinning of digital-physical models during prototyping” at the University of Bristol. The project is funded by the Engineering and Physical Sciences Research Council (EPSRC) Grant EP/R032696/1. Publisher Copyright: {\textcopyright} ICED 2021.All right reserved.",

year = "2021",

month = jul,

day = "27",

doi = "10.1017/pds.2021.2",

language = "English",

volume = "1",

series = "Proceedings of the Design Society",

pages = "11--20",

booktitle = "Proceedings of the Design Society",

}

A COMPARISON OF STRUCTURED LIGHT SCANNING AND PHOTOGRAMMETRY FOR THE DIGITISATION OF PHYSICAL PROTOTYPES. / Goudswaard, Mark A; Freeman Gebler, Owen C; Hicks, Ben J et al.

Proceedings of the Design Society . Vol. 1 2021. p. 11-20 (Proceedings of the Design Society).

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

TY - GEN

T1 - A COMPARISON OF STRUCTURED LIGHT SCANNING AND PHOTOGRAMMETRY FOR THE DIGITISATION OF PHYSICAL PROTOTYPES

AU - Goudswaard, Mark A

AU - Freeman Gebler, Owen C

AU - Hicks, Ben J

AU - Yon, Jason M

AU - Jones, David Edward

AU - Snider, Chris M

AU - Nassehi, Aydin

N1 - Funding Information: The work reported in this paper was undertaken as part of ?Improving the product development process through integrated revision control and twinning of digital-physical models during prototyping? at the University of Bristol. The project is funded by the Engineering and Physical Sciences Research Council (EPSRC) Grant EP/R032696/1. Funding Information: The work reported in this paper was undertaken as part of “Improving the product development process through integrated revision control and twinning of digital-physical models during prototyping” at the University of Bristol. The project is funded by the Engineering and Physical Sciences Research Council (EPSRC) Grant EP/R032696/1. Publisher Copyright: © ICED 2021.All right reserved.

PY - 2021/7/27

Y1 - 2021/7/27

U2 - 10.1017/pds.2021.2

DO - 10.1017/pds.2021.2

M3 - Conference Contribution (Conference Proceeding)

VL - 1

T3 - Proceedings of the Design Society

SP - 11

EP - 20

BT - Proceedings of the Design Society

ER -