A correlational study of areal surface texture parameters on some typical machined surfaces

Q. Qi; T. Li; P. J. Scott; X. Jiang

doi:10.1016/j.procir.2015.04.058

A correlational study of areal surface texture parameters on some typical machined surfaces

Q. Qi^*, T. Li, P. J. Scott, X. Jiang

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

42 Citations (Scopus)

Abstract

A number of areal surface texture parameters have been adopted by standards bodies, namely ISO 25178-2, in which forty-one parameters within six groups are defined. The selection of the suitable areal parameters becomes an issue for a designer. The study of correlation among parameters is one of the ways to find the most suitable parameters for a specification. This paper presents a Spearman's correlation study of areal surface texture parameters on some typical machined surfaces. Sixty surfaces, produced by nineteen machining methods, have been assessed by the use of an optical instrument; the operators adhered to ISO 25178-3; and parameters defined by ISO 25178-2. The correlation results are classified by using five correlation levels. It details the correlations between different groups of parameters, together with the correlation of parameters within the same group. The results are presented in Spearman's rank correlation coefficient matrix and charts. A three-layer parameters tree is then proposed to help engineer in the selection of parameters.

Original language	English
Title of host publication	13th CIRP Conference on Computer Aided Tolerancing
Editors	Yanlong Cao, Jianrong Tan
Publisher	Elsevier B.V.
Pages	149-154
Number of pages	6
ISBN (Electronic)	9781510803015
DOIs	https://doi.org/10.1016/j.procir.2015.04.058
Publication status	Published - 2015
Event	13th CIRP Conference on Computer Aided Tolerancing, CAT 2014 - Hangzhou, China Duration: 11 May 2014 → 14 May 2014

Publication series

Name	Procedia CIRP
Volume	27
ISSN (Print)	2212-8271

Conference

Conference	13th CIRP Conference on Computer Aided Tolerancing, CAT 2014
Country/Territory	China
City	Hangzhou
Period	11/05/14 → 14/05/14

Bibliographical note

Funding Information:
and Physical Sciences Research Council (EPSRC) funding of the EPSRC Centre for Innovative Manufacturing in Advanced Metrology (Ref: EP/I033424/1), and the funding of the EPSRC Fellowship in Manufacturing (Ref: EP/K037374/1), as well as the European Research Council under its programme ERC-2008-AdG 228117-Surfund.

Publisher Copyright:
© 2015 The Authors. Published by Elsevier B.V This is an open access article under the CC BY-NC-ND license.

Keywords

Areal surface texture
Height parameters
Hybrid parameters
Spearman's correlation
V parameters

Access to Document

10.1016/j.procir.2015.04.058

Handle.net

Persistent link

Cite this

@inproceedings{7a2e9c6b7fcd423f89d6362825decfa0,

title = "A correlational study of areal surface texture parameters on some typical machined surfaces",

abstract = "A number of areal surface texture parameters have been adopted by standards bodies, namely ISO 25178-2, in which forty-one parameters within six groups are defined. The selection of the suitable areal parameters becomes an issue for a designer. The study of correlation among parameters is one of the ways to find the most suitable parameters for a specification. This paper presents a Spearman's correlation study of areal surface texture parameters on some typical machined surfaces. Sixty surfaces, produced by nineteen machining methods, have been assessed by the use of an optical instrument; the operators adhered to ISO 25178-3; and parameters defined by ISO 25178-2. The correlation results are classified by using five correlation levels. It details the correlations between different groups of parameters, together with the correlation of parameters within the same group. The results are presented in Spearman's rank correlation coefficient matrix and charts. A three-layer parameters tree is then proposed to help engineer in the selection of parameters.",

keywords = "Areal surface texture, Height parameters, Hybrid parameters, Spearman's correlation, V parameters",

author = "Q. Qi and T. Li and Scott, {P. J.} and X. Jiang",

note = "Funding Information: and Physical Sciences Research Council (EPSRC) funding of the EPSRC Centre for Innovative Manufacturing in Advanced Metrology (Ref: EP/I033424/1), and the funding of the EPSRC Fellowship in Manufacturing (Ref: EP/K037374/1), as well as the European Research Council under its programme ERC-2008-AdG 228117-Surfund. Publisher Copyright: {\textcopyright} 2015 The Authors. Published by Elsevier B.V This is an open access article under the CC BY-NC-ND license.; 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014 ; Conference date: 11-05-2014 Through 14-05-2014",

year = "2015",

doi = "10.1016/j.procir.2015.04.058",

language = "English",

series = "Procedia CIRP",

publisher = "Elsevier B.V.",

pages = "149--154",

editor = "Yanlong Cao and Jianrong Tan",

booktitle = "13th CIRP Conference on Computer Aided Tolerancing",

address = "Netherlands",

}

Qi, Q, Li, T, Scott, PJ & Jiang, X 2015, A correlational study of areal surface texture parameters on some typical machined surfaces. in Y Cao & J Tan (eds), 13th CIRP Conference on Computer Aided Tolerancing. Procedia CIRP, vol. 27, Elsevier B.V., pp. 149-154, 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, Hangzhou, China, 11/05/14. https://doi.org/10.1016/j.procir.2015.04.058

A correlational study of areal surface texture parameters on some typical machined surfaces. / Qi, Q.; Li, T.; Scott, P. J. et al.
13th CIRP Conference on Computer Aided Tolerancing. ed. / Yanlong Cao; Jianrong Tan. Elsevier B.V., 2015. p. 149-154 (Procedia CIRP; Vol. 27).

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

TY - GEN

T1 - A correlational study of areal surface texture parameters on some typical machined surfaces

AU - Qi, Q.

AU - Li, T.

AU - Scott, P. J.

AU - Jiang, X.

N1 - Funding Information: and Physical Sciences Research Council (EPSRC) funding of the EPSRC Centre for Innovative Manufacturing in Advanced Metrology (Ref: EP/I033424/1), and the funding of the EPSRC Fellowship in Manufacturing (Ref: EP/K037374/1), as well as the European Research Council under its programme ERC-2008-AdG 228117-Surfund. Publisher Copyright: © 2015 The Authors. Published by Elsevier B.V This is an open access article under the CC BY-NC-ND license.

PY - 2015

Y1 - 2015

N2 - A number of areal surface texture parameters have been adopted by standards bodies, namely ISO 25178-2, in which forty-one parameters within six groups are defined. The selection of the suitable areal parameters becomes an issue for a designer. The study of correlation among parameters is one of the ways to find the most suitable parameters for a specification. This paper presents a Spearman's correlation study of areal surface texture parameters on some typical machined surfaces. Sixty surfaces, produced by nineteen machining methods, have been assessed by the use of an optical instrument; the operators adhered to ISO 25178-3; and parameters defined by ISO 25178-2. The correlation results are classified by using five correlation levels. It details the correlations between different groups of parameters, together with the correlation of parameters within the same group. The results are presented in Spearman's rank correlation coefficient matrix and charts. A three-layer parameters tree is then proposed to help engineer in the selection of parameters.

AB - A number of areal surface texture parameters have been adopted by standards bodies, namely ISO 25178-2, in which forty-one parameters within six groups are defined. The selection of the suitable areal parameters becomes an issue for a designer. The study of correlation among parameters is one of the ways to find the most suitable parameters for a specification. This paper presents a Spearman's correlation study of areal surface texture parameters on some typical machined surfaces. Sixty surfaces, produced by nineteen machining methods, have been assessed by the use of an optical instrument; the operators adhered to ISO 25178-3; and parameters defined by ISO 25178-2. The correlation results are classified by using five correlation levels. It details the correlations between different groups of parameters, together with the correlation of parameters within the same group. The results are presented in Spearman's rank correlation coefficient matrix and charts. A three-layer parameters tree is then proposed to help engineer in the selection of parameters.

KW - Areal surface texture

KW - Height parameters

KW - Hybrid parameters

KW - Spearman's correlation

KW - V parameters

UR - http://www.scopus.com/inward/record.url?scp=84939522866&partnerID=8YFLogxK

U2 - 10.1016/j.procir.2015.04.058

DO - 10.1016/j.procir.2015.04.058

M3 - Conference Contribution (Conference Proceeding)

AN - SCOPUS:84939522866

T3 - Procedia CIRP

SP - 149

EP - 154

BT - 13th CIRP Conference on Computer Aided Tolerancing

A2 - Cao, Yanlong

A2 - Tan, Jianrong

PB - Elsevier B.V.

T2 - 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014

Y2 - 11 May 2014 through 14 May 2014

ER -

A correlational study of areal surface texture parameters on some typical machined surfaces

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Handle.net

Other files and links

Fingerprint

Cite this