A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE

Alexandros Skouras; Martyn J. Pavier; Anton Shterenlikht

A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE

Alexandros Skouras, Martyn J. Pavier, Anton Shterenlikht

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

1 Citation (Scopus)

Abstract

This paper describes a study of the ability of the DUD technique to measure the spatial distribution of residual stresses. A two dimensional finite element model of a metal plate has been generated together with a representative state of residual stress. A simulation of the DHD technique is then carried out to provide a series of measurements of the residual stress which can be compared with the known residual stress. This simulation allows the effect of the varying trepan diameters on the accuracy of the DUD technique to be explored.

The results of the simulation show that the DIM technique can be used to measure residual stress with a high accuracy, but the increase in the trepan diameter introduce some errors. Suggestions and techniques for reducing these errors are presented.

Original language	English
Title of host publication	PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B
Editors	BJ Wiersma, B Bezensek, MPH Brongers, FW Brust, B Burdett, A Chakraborty, A Cockie, M Cohn, S Cravero, R Dennis, S Doctor, B Dogan, A Duncan, H Faria, Z Feng, J Fong, I Garcia, P Gilles, S Gosselin, K Hasegawa, O Hedden, J Helms, C Jaske, E Keim, YJ Kim, D Kwon, PS Lam, BS Lee, GQ Li, D Lidbury, AH Mahmoudi, P Marcal, M Mochizuki, D Moinereau, AH Mourad, A Motarjemi, N ODowd, S Ortner, SS Pang, HY Qian, WJ Ren, D Rudland, D Scarth, TL Sham, J Sharples, A Sherry, DJ Shim, A Sisan, R Swindeman, Y Tanaka, C Truman, JA Wang, B Wiersma, E Woldesenbet, K Yoon, XK Zhu
Place of Publication	NEW YORK
Publisher	American Society of Mechanical Engineers (ASME)
Pages	1477-1482
Number of pages	6
ISBN (Print)	978-0-7918-4925-5
Publication status	Published - 2010
Event	ASME Pressure Vessels and Piping Division/K-PVP Conference - Bellevue, United States Duration: 18 Jul 2010 → 22 Jul 2010

Conference

Conference	ASME Pressure Vessels and Piping Division/K-PVP Conference
Country/Territory	United States
City	Bellevue
Period	18/07/10 → 22/07/10

Handle.net

Persistent link

Cite this

Skouras, A., Pavier, M. J., & Shterenlikht, A. (2010). A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE. In BJ. Wiersma, B. Bezensek, MPH. Brongers, FW. Brust, B. Burdett, A. Chakraborty, A. Cockie, M. Cohn, S. Cravero, R. Dennis, S. Doctor, B. Dogan, A. Duncan, H. Faria, Z. Feng, J. Fong, I. Garcia, P. Gilles, S. Gosselin, K. Hasegawa, O. Hedden, J. Helms, C. Jaske, E. Keim, YJ. Kim, D. Kwon, PS. Lam, BS. Lee, GQ. Li, D. Lidbury, AH. Mahmoudi, P. Marcal, M. Mochizuki, D. Moinereau, AH. Mourad, A. Motarjemi, N. ODowd, S. Ortner, SS. Pang, HY. Qian, WJ. Ren, D. Rudland, D. Scarth, TL. Sham, J. Sharples, A. Sherry, DJ. Shim, A. Sisan, R. Swindeman, Y. Tanaka, C. Truman, JA. Wang, B. Wiersma, E. Woldesenbet, K. Yoon, ... XK. Zhu (Eds.), PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B (pp. 1477-1482). American Society of Mechanical Engineers (ASME).

Skouras, Alexandros ; Pavier, Martyn J. ; Shterenlikht, Anton. / A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE. PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B. editor / BJ Wiersma ; B Bezensek ; MPH Brongers ; FW Brust ; B Burdett ; A Chakraborty ; A Cockie ; M Cohn ; S Cravero ; R Dennis ; S Doctor ; B Dogan ; A Duncan ; H Faria ; Z Feng ; J Fong ; I Garcia ; P Gilles ; S Gosselin ; K Hasegawa ; O Hedden ; J Helms ; C Jaske ; E Keim ; YJ Kim ; D Kwon ; PS Lam ; BS Lee ; GQ Li ; D Lidbury ; AH Mahmoudi ; P Marcal ; M Mochizuki ; D Moinereau ; AH Mourad ; A Motarjemi ; N ODowd ; S Ortner ; SS Pang ; HY Qian ; WJ Ren ; D Rudland ; D Scarth ; TL Sham ; J Sharples ; A Sherry ; DJ Shim ; A Sisan ; R Swindeman ; Y Tanaka ; C Truman ; JA Wang ; B Wiersma ; E Woldesenbet ; K Yoon ; XK Zhu. NEW YORK : American Society of Mechanical Engineers (ASME), 2010. pp. 1477-1482

@inproceedings{8a7fb0cd223b41fcb3c9623d3848a945,

title = "A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE",

abstract = "This paper describes a study of the ability of the DUD technique to measure the spatial distribution of residual stresses. A two dimensional finite element model of a metal plate has been generated together with a representative state of residual stress. A simulation of the DHD technique is then carried out to provide a series of measurements of the residual stress which can be compared with the known residual stress. This simulation allows the effect of the varying trepan diameters on the accuracy of the DUD technique to be explored.The results of the simulation show that the DIM technique can be used to measure residual stress with a high accuracy, but the increase in the trepan diameter introduce some errors. Suggestions and techniques for reducing these errors are presented.",

author = "Alexandros Skouras and Pavier, {Martyn J.} and Anton Shterenlikht",

year = "2010",

language = "English",

isbn = "978-0-7918-4925-5",

pages = "1477--1482",

editor = "BJ Wiersma and B Bezensek and MPH Brongers and FW Brust and B Burdett and A Chakraborty and A Cockie and M Cohn and S Cravero and R Dennis and S Doctor and B Dogan and A Duncan and H Faria and Z Feng and J Fong and I Garcia and P Gilles and S Gosselin and K Hasegawa and O Hedden and J Helms and C Jaske and E Keim and YJ Kim and D Kwon and PS Lam and BS Lee and GQ Li and D Lidbury and AH Mahmoudi and P Marcal and M Mochizuki and D Moinereau and AH Mourad and A Motarjemi and N ODowd and S Ortner and SS Pang and HY Qian and WJ Ren and D Rudland and D Scarth and TL Sham and J Sharples and A Sherry and DJ Shim and A Sisan and R Swindeman and Y Tanaka and C Truman and JA Wang and B Wiersma and E Woldesenbet and K Yoon and XK Zhu",

booktitle = "PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B",

publisher = "American Society of Mechanical Engineers (ASME)",

address = "United States",

note = "ASME Pressure Vessels and Piping Division/K-PVP Conference ; Conference date: 18-07-2010 Through 22-07-2010",

}

Skouras, A, Pavier, MJ & Shterenlikht, A 2010, A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE. in BJ Wiersma, B Bezensek, MPH Brongers, FW Brust, B Burdett, A Chakraborty, A Cockie, M Cohn, S Cravero, R Dennis, S Doctor, B Dogan, A Duncan, H Faria, Z Feng, J Fong, I Garcia, P Gilles, S Gosselin, K Hasegawa, O Hedden, J Helms, C Jaske, E Keim, YJ Kim, D Kwon, PS Lam, BS Lee, GQ Li, D Lidbury, AH Mahmoudi, P Marcal, M Mochizuki, D Moinereau, AH Mourad, A Motarjemi, N ODowd, S Ortner, SS Pang, HY Qian, WJ Ren, D Rudland, D Scarth, TL Sham, J Sharples, A Sherry, DJ Shim, A Sisan, R Swindeman, Y Tanaka, C Truman, JA Wang, B Wiersma, E Woldesenbet, K Yoon & XK Zhu (eds), PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B. American Society of Mechanical Engineers (ASME), NEW YORK, pp. 1477-1482, ASME Pressure Vessels and Piping Division/K-PVP Conference, Bellevue, United States, 18/07/10.

A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE. / Skouras, Alexandros; Pavier, Martyn J.; Shterenlikht, Anton.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B. ed. / BJ Wiersma; B Bezensek; MPH Brongers; FW Brust; B Burdett; A Chakraborty; A Cockie; M Cohn; S Cravero; R Dennis; S Doctor; B Dogan; A Duncan; H Faria; Z Feng; J Fong; I Garcia; P Gilles; S Gosselin; K Hasegawa; O Hedden; J Helms; C Jaske; E Keim; YJ Kim; D Kwon; PS Lam; BS Lee; GQ Li; D Lidbury; AH Mahmoudi; P Marcal; M Mochizuki; D Moinereau; AH Mourad; A Motarjemi; N ODowd; S Ortner; SS Pang; HY Qian; WJ Ren; D Rudland; D Scarth; TL Sham; J Sharples; A Sherry; DJ Shim; A Sisan; R Swindeman; Y Tanaka; C Truman; JA Wang; B Wiersma; E Woldesenbet; K Yoon; XK Zhu. NEW YORK: American Society of Mechanical Engineers (ASME), 2010. p. 1477-1482.

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

TY - GEN

T1 - A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE

AU - Skouras, Alexandros

AU - Pavier, Martyn J.

AU - Shterenlikht, Anton

PY - 2010

Y1 - 2010

N2 - This paper describes a study of the ability of the DUD technique to measure the spatial distribution of residual stresses. A two dimensional finite element model of a metal plate has been generated together with a representative state of residual stress. A simulation of the DHD technique is then carried out to provide a series of measurements of the residual stress which can be compared with the known residual stress. This simulation allows the effect of the varying trepan diameters on the accuracy of the DUD technique to be explored.The results of the simulation show that the DIM technique can be used to measure residual stress with a high accuracy, but the increase in the trepan diameter introduce some errors. Suggestions and techniques for reducing these errors are presented.

AB - This paper describes a study of the ability of the DUD technique to measure the spatial distribution of residual stresses. A two dimensional finite element model of a metal plate has been generated together with a representative state of residual stress. A simulation of the DHD technique is then carried out to provide a series of measurements of the residual stress which can be compared with the known residual stress. This simulation allows the effect of the varying trepan diameters on the accuracy of the DUD technique to be explored.The results of the simulation show that the DIM technique can be used to measure residual stress with a high accuracy, but the increase in the trepan diameter introduce some errors. Suggestions and techniques for reducing these errors are presented.

M3 - Conference Contribution (Conference Proceeding)

SN - 978-0-7918-4925-5

SP - 1477

EP - 1482

BT - PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B

A2 - Wiersma, BJ

A2 - Bezensek, B

A2 - Brongers, MPH

A2 - Brust, FW

A2 - Burdett, B

A2 - Chakraborty, A

A2 - Cockie, A

A2 - Cohn, M

A2 - Cravero, S

A2 - Dennis, R

A2 - Doctor, S

A2 - Dogan, B

A2 - Duncan, A

A2 - Faria, H

A2 - Feng, Z

A2 - Fong, J

A2 - Garcia, I

A2 - Gilles, P

A2 - Gosselin, S

A2 - Hasegawa, K

A2 - Hedden, O

A2 - Helms, J

A2 - Jaske, C

A2 - Keim, E

A2 - Kim, YJ

A2 - Kwon, D

A2 - Lam, PS

A2 - Lee, BS

A2 - Li, GQ

A2 - Lidbury, D

A2 - Mahmoudi, AH

A2 - Marcal, P

A2 - Mochizuki, M

A2 - Moinereau, D

A2 - Mourad, AH

A2 - Motarjemi, A

A2 - ODowd, N

A2 - Ortner, S

A2 - Pang, SS

A2 - Qian, HY

A2 - Ren, WJ

A2 - Rudland, D

A2 - Scarth, D

A2 - Sham, TL

A2 - Sharples, J

A2 - Sherry, A

A2 - Shim, DJ

A2 - Sisan, A

A2 - Swindeman, R

A2 - Tanaka, Y

A2 - Truman, C

A2 - Wang, JA

A2 - Wiersma, B

A2 - Woldesenbet, E

A2 - Yoon, K

A2 - Zhu, XK

PB - American Society of Mechanical Engineers (ASME)

CY - NEW YORK

T2 - ASME Pressure Vessels and Piping Division/K-PVP Conference

Y2 - 18 July 2010 through 22 July 2010

ER -

Skouras A, Pavier MJ, Shterenlikht A. A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE. In Wiersma BJ, Bezensek B, Brongers MPH, Brust FW, Burdett B, Chakraborty A, Cockie A, Cohn M, Cravero S, Dennis R, Doctor S, Dogan B, Duncan A, Faria H, Feng Z, Fong J, Garcia I, Gilles P, Gosselin S, Hasegawa K, Hedden O, Helms J, Jaske C, Keim E, Kim YJ, Kwon D, Lam PS, Lee BS, Li GQ, Lidbury D, Mahmoudi AH, Marcal P, Mochizuki M, Moinereau D, Mourad AH, Motarjemi A, ODowd N, Ortner S, Pang SS, Qian HY, Ren WJ, Rudland D, Scarth D, Sham TL, Sharples J, Sherry A, Shim DJ, Sisan A, Swindeman R, Tanaka Y, Truman C, Wang JA, Wiersma B, Woldesenbet E, Yoon K, Zhu XK, editors, PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B. NEW YORK: American Society of Mechanical Engineers (ASME). 2010. p. 1477-1482

A SPATIAL RESOLUTION OF RESIDUAL STRESS MEASUREMENTS USING THE DEEP HOLE DRILLING TECHNIQUE

Abstract

Conference

Handle.net

Fingerprint

Cite this