Design and fabrication of a mid infra-red photonic crystal defect laser in indium antimonide

JR Pugh; PJ Heard; GR Nash; T Ashley; JG Rarity; MJ Cryan

Design and fabrication of a mid infra-red photonic crystal defect laser in indium antimonide

JR Pugh, PJ Heard, GR Nash, T Ashley, JG Rarity, MJ Cryan

Research output: Contribution to conference › Conference Abstract

1 Citation (Scopus)

327 Downloads (Pure)

Abstract

This paper presents 2D FDTD modelling and prototype fabrication of a mid-infrared photonic crystal defect laser. The device is fabricated using a two stage focused ion beam process which results in improved hole profiles.

Original language	English
Pages	1 - 2
Publication status	Published - May 2008

Bibliographical note

Terms of use: Copyright © 2008 IEEE. Reprinted from Conference on Lasers and Electro-Optics, 2008 and 2008 Conference on Quantum Electronics and Laser Science (CLEO/QELS 2008).

This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Bristol's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected].

By choosing to view this document, you agree to all provisions of the copyright laws protecting it.

Name of Conference: Conference on Lasers and Electro-Optics and Conference on Quantum Electronics and Laser Science
Venue of Conference: San Jose, CA

Research Groups and Themes

QETLabs
Photonics and Quantum

Access to Document

Pugh IEEE CLEOQELSAccepted author manuscript, 261 KB

http://hdl.handle.net/1983/1641

Handle.net

Persistent link

Cite this

@conference{2159e086702145e69588947fe2c40832,

title = "Design and fabrication of a mid infra-red photonic crystal defect laser in indium antimonide",

abstract = "This paper presents 2D FDTD modelling and prototype fabrication of a mid-infrared photonic crystal defect laser. The device is fabricated using a two stage focused ion beam process which results in improved hole profiles.",

author = "JR Pugh and PJ Heard and GR Nash and T Ashley and JG Rarity and MJ Cryan",

note = "Terms of use: Copyright {\textcopyright} 2008 IEEE. Reprinted from Conference on Lasers and Electro-Optics, 2008 and 2008 Conference on Quantum Electronics and Laser Science (CLEO/QELS 2008). This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Bristol's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it. Name of Conference: Conference on Lasers and Electro-Optics and Conference on Quantum Electronics and Laser Science Venue of Conference: San Jose, CA",

year = "2008",

month = may,

language = "English",

pages = "1 -- 2",

}

TY - CONF

T1 - Design and fabrication of a mid infra-red photonic crystal defect laser in indium antimonide

AU - Pugh, JR

AU - Heard, PJ

AU - Nash, GR

AU - Ashley, T

AU - Rarity, JG

AU - Cryan, MJ

N1 - Terms of use: Copyright © 2008 IEEE. Reprinted from Conference on Lasers and Electro-Optics, 2008 and 2008 Conference on Quantum Electronics and Laser Science (CLEO/QELS 2008). This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Bristol's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it. Name of Conference: Conference on Lasers and Electro-Optics and Conference on Quantum Electronics and Laser Science Venue of Conference: San Jose, CA

PY - 2008/5

Y1 - 2008/5

N2 - This paper presents 2D FDTD modelling and prototype fabrication of a mid-infrared photonic crystal defect laser. The device is fabricated using a two stage focused ion beam process which results in improved hole profiles.

AB - This paper presents 2D FDTD modelling and prototype fabrication of a mid-infrared photonic crystal defect laser. The device is fabricated using a two stage focused ion beam process which results in improved hole profiles.

M3 - Conference Abstract

SP - 1

EP - 2

ER -

Design and fabrication of a mid infra-red photonic crystal defect laser in indium antimonide

Abstract

Bibliographical note

Research Groups and Themes

Access to Document

Handle.net

Fingerprint

Cite this