Feature-Based Design for Manufacturing Guidelines for Dry Fibre AFP

Laura Veldenz, Mattia Di Francesco, Simon Astwood, Peter Giddings, Byung Chul Kim, Kevin Potter

Research output: Chapter in Book/Report/Conference proceedingConference Contribution (Conference Proceeding)

126 Downloads (Pure)

Abstract

In the aerospace industry, major composite structural components are manufactured by Automated Fibre Placement (AFP), which is an automated material deposition process laying up slit prepreg tapes on a mould. Dry fibre material has emerged as a promising alternative to prepreg for AFP with, among others, the claimed benefit of better conformability to steered paths. However, any radius of steering will inevitably introduce disturbance in the fibre alignment which is expected to increase with the degree of tape curvature. The minimum steering radius is frequently used to describe the smallest radius that can be achieved during lay-up. However, this is often a machine- and material-dependent parameter difficult to estimate objectively and therefore hardly reliable. An operator-independent metric to quantify the quality of a steered path would provide guidance for design.
In order to address this challenge, this work presents a quantitative analysis of out-of-plane fibre waviness of the preform. The measurement is based on a 3D surface roughness measurement, and quantifies the out-of-plane wrinkling generated on the deposited surface. The feasibility of the method is demonstrated and shown to be a useful quantitative criterion to quantify material dependent wrinkle formation.
Original languageEnglish
Title of host publicationAutomated Composites Manufacturing
Subtitle of host publicationThird International Symposium 2018
EditorsSuong Van Hoa
PublisherLancaster, PA ,USA: DEStech Publications Inc
ISBN (Print)9781605954318
Publication statusPublished - 1 Feb 2018

Fingerprint Dive into the research topics of 'Feature-Based Design for Manufacturing Guidelines for Dry Fibre AFP'. Together they form a unique fingerprint.

Cite this