Skip to content

Hybrid Prototyping: Pure Theory or a Practical Solution to Accelerating Prototyping Tasks?

Research output: Contribution to conferencePaper

Original languageEnglish
Number of pages9
DatePublished - 5 Aug 2019
Event22nd International Conference on Engineering Design - Delft, Netherlands
Duration: 5 Aug 20198 Aug 2019

Conference

Conference22nd International Conference on Engineering Design
CountryNetherlands
CityDelft
Period5/08/198/08/19

Abstract

Physical prototyping is critical activity in the produce development process, but the cost and time required to produce prototypes hinders it use in the design process. Hybrid prototyping through coupling LEGO and FDM printing is presented as an approach to address these issues. After establishing the separate design rules for FDM printing and LEGO, this paper created new set of rules called Design for Fabrication (DfF) for hybrid prototyping. These cover the three main considerations (Technical, Process, and Design) that the designer and process planning must include to practically implement LEGO and FDM hybrid prototyping. The DfF rules were considered in a prototype of a computer mouse. While the fabrication time was not reduced as expected, it showed that the rules could be practically implemented in a real-world example. Additional considerations were identified that are to be included in the DfF rules.

Further work is required to realise the predicted step-change reduction in fabrication time. The first approach is to leverage multiple printers to parallelise the printing. The second is to reduce fidelity while maintaining high fidelity in key regions of interest.

Event

22nd International Conference on Engineering Design

Duration5 Aug 20198 Aug 2019
CityDelft
CountryNetherlands
Degree of recognitionInternational event

Event: Conference

Documents

Documents

View research connections

Related faculties, schools or groups