Skip to content

Interface shear strength of polypropylene pipeline coatings and granular materials at low stress level

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Original languageEnglish
Title of host publication7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019
Subtitle of host publicationOpen Access proceedings in Environment, Energy and Earth Sciences
EditorsErdin Ibraim, Alessandro Tarantino
Publisher or commissioning bodyEDP Sciences
Number of pages6
Volume92
ISBN (Electronic)9782759890644
DOIs
DateAccepted/In press - 30 Jun 2018
DateE-pub ahead of print - 25 Jun 2019
DatePublished (current) - 25 Jun 2019
Event7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019 - Glasgow, United Kingdom
Duration: 26 Jun 201928 Jun 2019

Publication series

NameE3S Web of Conferences
Volume92
ISSN (Print)2555-0403
ISSN (Electronic)2267-1242

Conference

Conference7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019
CountryUnited Kingdom
CityGlasgow
Period26/06/1928/06/19

Abstract

A range of sands were tested in direct and interface shear at very low stresses to determine the interface shear strength of polypropylene pipeline coating counterfaces and to evaluate interface efficiency. Polypropylene has a wide range of applications as a coating material in the offshore environment, so quantification of interfacial strength is an important component for geotechnical design. Direct shear tests show classic peak-postpeak stress-displacement and stress-dilatancy behaviour whereas interface tests show an elastic, perfectly plastic type behaviour for both loose and dense samples with no appreciable volumetric response. Interface efficiencies generally range between 0.3 and 0.7 dependent on both grain size and stress level. Normalised roughness is used to relate the surface roughness to the grain size and shows that the greater interface strength with smaller grained sands can be explained by their greater effective roughness. The relationship between stress ratio and normalised roughness for sand-polypropylene resembles established relationships for sand-steel interfaces.

Event

7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019

Duration26 Jun 201928 Jun 2019
CityGlasgow
CountryUnited Kingdom

Event: Conference

Download statistics

No data available

Documents

Documents

  • Full-text PDF (final published version)

    Rights statement: This is the final published version of the article (version of record). It first appeared online via EDP Sciences at https://www.e3s-conferences.org/articles/e3sconf/abs/2019/18/e3sconf_isg2019_13010/e3sconf_isg2019_13010.html. Please refer to any applicable terms of use of the publisher.

    Final published version, 728 KB, PDF document

    Licence: CC BY

DOI

View research connections

Related faculties, schools or groups