On-Line Parameter Measurement of Induction Machines

Derrick M J  Holliday; TC Green; BW Williams

doi:10.1109/IECON.1993.339139

On-Line Parameter Measurement of Induction Machines

Derrick M J Holliday, TC Green, BW Williams

Department of Electrical & Electronic Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

Abstract

The problem of degradation in performance of an induction machine controller resulting from parameter variation is tackled using an online measurement technique which may be used as an alternative or supplement to parameter adaption. Experimental data shows that a test similar to the locked rotor test may be successfully performed by injecting a low magnitude, high frequency voltage set into the motor supply. Experimental results show consistent measures of induction machine stator and rotor resistance parameters are obtained. Guidelines for maintaining accuracy under various operating conditions are discussed. A custom PWM generator is developed which improves the experimental process and a detection system using a microprocessor is proposed.

Translated title of the contribution	On-Line Parameter Measurement of Induction Machines
Original language	English
Title of host publication	Proceedings of the IECON '93., International Conference on Industrial Electronics, Control, and Instrumentation, 1993
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	992-996
Number of pages	5
ISBN (Print)	0780308913
DOIs	https://doi.org/10.1109/IECON.1993.339139
Publication status	Published - 1993

Access to Document

10.1109/IECON.1993.339139

Handle.net

Persistent link

Cite this

@inproceedings{9c735d615d2f467eb75eb6a1640f80de,

title = "On-Line Parameter Measurement of Induction Machines",

abstract = "The problem of degradation in performance of an induction machine controller resulting from parameter variation is tackled using an online measurement technique which may be used as an alternative or supplement to parameter adaption. Experimental data shows that a test similar to the locked rotor test may be successfully performed by injecting a low magnitude, high frequency voltage set into the motor supply. Experimental results show consistent measures of induction machine stator and rotor resistance parameters are obtained. Guidelines for maintaining accuracy under various operating conditions are discussed. A custom PWM generator is developed which improves the experimental process and a detection system using a microprocessor is proposed.",

author = "Holliday, {Derrick M J} and TC Green and BW Williams",

year = "1993",

doi = "10.1109/IECON.1993.339139",

language = "English",

isbn = "0780308913",

pages = "992--996",

booktitle = "Proceedings of the IECON '93., International Conference on Industrial Electronics, Control, and Instrumentation, 1993",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

}

On-Line Parameter Measurement of Induction Machines. / Holliday, Derrick M J ; Green, TC; Williams, BW.
Proceedings of the IECON '93., International Conference on Industrial Electronics, Control, and Instrumentation, 1993. Institute of Electrical and Electronics Engineers (IEEE), 1993. p. 992-996.

Research output: Chapter in Book/Report/Conference proceeding › Conference Contribution (Conference Proceeding)

TY - GEN

T1 - On-Line Parameter Measurement of Induction Machines

AU - Holliday, Derrick M J

AU - Green, TC

AU - Williams, BW

PY - 1993

Y1 - 1993

N2 - The problem of degradation in performance of an induction machine controller resulting from parameter variation is tackled using an online measurement technique which may be used as an alternative or supplement to parameter adaption. Experimental data shows that a test similar to the locked rotor test may be successfully performed by injecting a low magnitude, high frequency voltage set into the motor supply. Experimental results show consistent measures of induction machine stator and rotor resistance parameters are obtained. Guidelines for maintaining accuracy under various operating conditions are discussed. A custom PWM generator is developed which improves the experimental process and a detection system using a microprocessor is proposed.

AB - The problem of degradation in performance of an induction machine controller resulting from parameter variation is tackled using an online measurement technique which may be used as an alternative or supplement to parameter adaption. Experimental data shows that a test similar to the locked rotor test may be successfully performed by injecting a low magnitude, high frequency voltage set into the motor supply. Experimental results show consistent measures of induction machine stator and rotor resistance parameters are obtained. Guidelines for maintaining accuracy under various operating conditions are discussed. A custom PWM generator is developed which improves the experimental process and a detection system using a microprocessor is proposed.

U2 - 10.1109/IECON.1993.339139

DO - 10.1109/IECON.1993.339139

M3 - Conference Contribution (Conference Proceeding)

SN - 0780308913

SP - 992

EP - 996

BT - Proceedings of the IECON '93., International Conference on Industrial Electronics, Control, and Instrumentation, 1993

PB - Institute of Electrical and Electronics Engineers (IEEE)

ER -

On-Line Parameter Measurement of Induction Machines

Abstract

Access to Document

Handle.net

Fingerprint

Cite this