Skip to content

Redistribution of Residual Stress by Thermal Shock in Reactor Pressure Vessel Steel Clad with Nickel Alloy

Research output: Contribution to journalArticle

Original languageEnglish
Pages (from-to)37-47
Number of pages11
JournalInternational Journal of Pressure Vessels and Piping
Early online date17 Nov 2018
DateAccepted/In press - 11 Nov 2018
DateE-pub ahead of print - 17 Nov 2018
DatePublished (current) - Jan 2019


This paper characterises the residual stress in nuclear reactor pressure vessel steel clad with nickel-based alloy and investigates the interaction between residual and thermal stresses during thermal shock. Residual stress measurements were made on two plates of SA508 Grade 4N steel, clad with Alloy 82 nickel-based alloy. The techniques used to measure the residual stresses were: deep hole drilling, centre hole drilling, and the contour method. One plate was as-welded, the other post-weld heat-treated. The post-weld heat-treated plate was subjected to thermal shock by heating it up and then spraying the surface of the cladding with cold water. The residual stress was measured again afterwards. A finite element simulation was made to investigate the physical mechanisms causing residual stress redistribution during thermal shock. Thermal shock caused significant residual stress redistribution in the cladding due to elastic-plastic interaction between the thermal stress and the cladding residual stress. The results demonstrate that an assessment of the safety of a reactor pressure vessel during thermal shock could be conservative for small surface defects if it is assumed that residual and thermal stresses combine elastically.

    Research areas

  • Residual stress, Structural integrity, Thermal stress, Cladding, Thermal shock

Download statistics

No data available



  • Full-text PDF (accepted author manuscript)

    Rights statement: This is the author accepted manuscript (AAM). The final published version (version of record) is available online via Elsevier at . Please refer to any applicable terms of use of the publisher.

    Accepted author manuscript, 1.2 MB, PDF document


View research connections

Related faculties, schools or groups