Skip to main navigation Skip to search Skip to main content

Temperature and pressure effects on microemulsions in oily media

  • Ilona E Serafin

Student thesis: Doctoral Thesis › Doctor of Philosophy (PhD)

Abstract

Microemulsion phase stability is dependent on the external thermodynamic conditions, among other factors. Numerous phase behaviour studies have examined the stability of these systems. This Thesis explores the attempts to overcome the effects of temperature and pressure, and adds microscopic insights to the previously published macroscopic data. 
Small-angle neutron scattering (SANS) was used to provide structural details within two separate research avenues. 
The first approach is inspired by the Principle of Corresponding States, which states that at the same reduced conditions, fluids have similar properties. It has been recognised that temperature and pressure affect the compressibility factor and density in a similar manner. A question arose as to whether solvent mass density can be used as a link, and if similarly behaving microemulsion systems can be attained at vastly different thermodynamic conditions, but same density. Can this be achieved for different solvents? How important is the chemical structure of the solvent? Density was tuned by i) mixing solvents of different densities and chemical identities at carefully selected ratios at room temperature and pressure; and ii) adjusting temperature and pressure using specialized pressure equipment. SANS was used to discern any similarities and differences in the behaviour of model Aerosol-OT-based microemulsion droplets dispersed in non-polar media. For solvent mixing at room temperature and pressure, the system microstructure remained largely unchanged as the solvent identities were varied, and the extent of attractive interactions could be tuned by modulating solvent molecular volume Vmol. When pure (same) solvents were density matched at different thermodynamic conditions, varying temperature and pressure did not significantly change the structure or interactions between the droplets, while within a single-phase region. It was found that more information is required to state whether this hypothesis applies to microemulsions in different solvents. 
The second approach is based on surfactants with opposite water solubilities as a function of temperature. Literature reports macroscopic studies describing systems with reduced temperature sensitivity when such surfactants are mixed. Here, a systematic SANS study of surfactant mixtures, spanning a wide range of surfactant types (non-ionic, anionic, cationic, zwitterionic), attempts to shed some light on the effects of mixing surfactants on the microstructure, under varying temperatures. It was found that the effects of temperature on surfactant mixes depended on the structural identity of the amphiphiles. Mixing surfactants with opposing water solubilities without considering their chemical structure does not simply lead to systems with reduced temperature sensitivity. For systems where AOT and C12E5 amphiphiles were selectively highlighted by contrast variation in SANS, it was indicated that they might participate in microemulsion stabilization in different manners. This might be down to an inhomogeneous distribution of surfactants.

Date of Award17 Jun 2025
Original languageEnglish
Awarding Institution
  • University of Bristol
SupervisorJulian Eastoe (Supervisor) & Wuge H Briscoe (Supervisor)

Cite this

'